floyd99

hi folks, am i doing something wrong?? I have a tap tempo set and it's working fine. if i press and hold the TAP button to get to my tuner, once i exit out of tuner, the tap tempo is now set at a really slow tempo (in other words, it's like the pressing and holding of the tap tempo button is setting a new tempo before it then swaps to tuner mode) has anyone else got the same issue?

Thanks fukuri!! Got my helix tonight and I've been playing. I have my electric set up using guitar input (only) to 1a, 1b and 2a. Then I have 2b solely dedicated for the acoustic with its own separate input (aux) and dedicated output plus a footswitch to mute it. It did take me a while to figure out how to get the paths separated. It's not very intuitive and the manual doesn't mention you can do it. But, it can! Absolutely perfect! Only prob is for practicing with headphones I need to pan both outputs to centre, but that's okay. Easy enough to change back to pan left and right for the two outputs. Once I have a patch that works for me and I'm happy I can then just copy it and make versions for practice, live with amp, live without amp etc. Sounds ok in headphones, real test will be a live situation....

Just got my Helix today. I have exactly the same problem. The Helix software keeps losing connection with the unit. Haven't tried a different cable yet.. Using the one that came with the helix. But I know it's not my macbook

Great, thanks heaps. Basically it looks like it'll do everything I need should I want to. At this stage I don't think I would run the banjo but nice to know I could. Hmm!!!!!!

thanks for your response ! I still haven't got my head around the paths and inputs. I didn't realise you could give 2B is own different input and output. So what you say makes sense if that's the case. Given that.. my next question leading on from that is could I use the MIC input (for a banjo using condensor mic) into its own path on 2A and direct that to the same output as the acoustic on 2B? Also, how is footswitch muting of those paths individually best achieved? Where i'm getting at there is: if I was sharing an output for both 2A and 2B, i can't bypass the output to mute, as one would affect the other (??). And, muting the input is problematic as that would stop being able to tune. So, would I just have a volume block in each path and set the footswitch to toggle the volume parameter from 0 to 100? :)

damn, thanks Duncan. Yes, it's the Seeker that I think i'm after too. I think i'll pick up a cheap M5 second hand specifically for this one effect and show, and then sell it afterwards. Cheaper than buying a real Zvek Seek Wah.

hi all, considering taking the plunge to get a helix to replace a combination of gear. i think the answer to all this is yes, but i'd just like to confirm. I have electric plus acoustic instruments. I use stompbox pedals now and don't need the complexity of patch changes.. so I'd be running the helix in stompbox mode, and a single preset to house everything I need. Basically some effects and an amp/cab. Currently depending on type of gig, I use a real tube amp, sometimes i use a Tech21 sansamp and direct to PA for electrics and always direct to PA for acoustics. If i'm using acoustics, i'd like them routed to the PA using a different channel so the audio guys can mix the electric and acoustics separately. Can I; Electric - Path 1 - guitar input - effects & drive blocks, amp, cab etc - Output to XLR & 1/4" outs PANNED LEFT --> helix left output either direct to PA or to tube amp (if going to tube amp, i'd just bypass the amp/cab blocks. This means everything on the board remains the same, just no amp/cab - simpler for me) Acoustics - Path 2 - AUX input - reverb effect block - Output to XLR & 1/4" outs PANNED RIGHT --> helix right output direct to PA I'd like to be able to mute the acoustics when not in use. This will enable me to unplug when not in use or change instruments. So can i have one of the stomp footswitches set to silently mute/unmute path 2 output? Electric doesn't matter as I would have a volume pedal in the electric path (only) and heel the volume to mute. This basically mimics what i'm doing now. If there's a better way to achieve what i'm after please let me know. Hopefully this makes sense. Cheers Dave

Hi all, i'm seriously considering getting a Helix.. however i've got a theatre show coming up that specifically needs Seek Wah (or an alternate similar sounding sequenced wah). Can anyone who has a Helix please let me know if any of the included effects will give something resembling this? thanks dave