Jump to content

Refuge-Studio

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by Refuge-Studio

  1. Great topic! How about wiring a switchable resistor in series with the 10k pot of the pedal? This way you could pass the auto-on threshold by pressing the toe switch and adding the switchable resistor value to the value of the 10k pot. You would not need an additional input with this method. I don't exactly know how the settings in the Helix work since I am not in my studio right now, so maybe it's just not possible to implement software-wise.
  2. Just a small tip: if you are using Ownhammer impulses, try the non-minimum phase transformed files, e.g. those located in the fractal folders. Impulses in the Line6 folder are minimum phase transformed (MPT). I found that the non-MPT samples feel a little more realistic in the low mids and may even explain why the AxeFX may sound slightly fuller in some of the direct comparisons. Don't expect too much, but I liked the effect and will continue to use those IRs. Since I am only using Ownhammer impulses in combination with each other, there shouldn't be any phase issues either. From the Ownhammer manual: "Files in the “Mpt†folder are minimum phase transformed versions of the ‘raw’ files in the directory above them. Minimum phase transformation destroys all phase information contained within an IR file, and has a sonic result that may work better or worse for a given situation or taste. Above all, minimum phase transformation achieves a global time and phase alignment for IR’s from any source or creator. All non-Mpt’d OwnHammer files are universally time aligned to be 1st party compatible for blending, however if blending with 3rd party content, Mpt’d files will likely be required unless significant time is spent in the parallel time and phase alignment process."
  3. After installing 2.3 (which is otherwise great!) I can no longer change the s/pdif output volume in the global menu. When I turn the knob, nothing changes. When I page back and forth, it shows a change, but the output volume doesn't change. S/pdif output volume was also not restored from the backup. Edit: fixed by resetting globals (holding 5&6 while powering on).
×
×
  • Create New...