Search the Community
Showing results for tags '2.4 ghz'.
Found 2 results
-
Hi all, sorry posted it before in the wrong section, deleted the old post. i'm an happy long time user of Line6 Relay G50 wireless system, for all my gigs (I'm a bassist). I've recently purchased a wireless IEM system, i.e. XVive U4 with 6 channels available. However, I only realized after purchase that both work wirelessly at 2.4ghz frequencies! I live in Rome, Italy and, actually, dunno what are the usable frequencies both for my G50 and the Xvive: on my G50 I always used from 1st to 3th channels without issues, never tried the other 9 channels. Now, since I wanna go to gigs with both, I really appreciate your suggestions regarding the best channles combination to avoid interferences among the 2 systems. I retrieved on the user manual the 2.4Ghz Frequency Tables of the XVive U4 six channels, i.e.: CH 1: 2402MHz, 2480MHz, 2482MHz CH 2: 2408MHz, 2472MHz, 2474MHz CH 3: 2416MHz, 2464MHz, 2466MHz CH 4: 2434MHz, 2440MHz, 2442MHz CH 5:2427MHz, 2448MHz, 2450MHz CH 6: 2422MHz, 2456MHz, 2458MHz Regarding the G50 I'vent found anything on official manuals, only this topic and table: Based on the tables and values above, could you advise me on which channel to put on the g50 and what on Xvive, in order to avoid overlapping chanels and interferences\signal drops? Many thanks to u all! :) -
USB 3.0 Interference with 2.4GHz Radios
line6jonb posted a article in General XD-V/Relay Information
USB 3.0 computer cables and peripherals, including hard drives, are known to emit radio frequency interference throughout the 2.4GHz band, which results in reduced range and/or performance for any 2.4GHz device in its proximity (including wireless keyboard or mouse, WiFi, etc.). We recommend placing any digital wireless receivers at least two meters away from the USB 3.0 device and its cabling. Below is a link to an study by Intel regarding this interference. http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html Interferenzen zwischen USB 3.0 und 2.4GHz-Geräten USB 3.0 Computerkabel und –geräte sind dafür bekannt Interferenzen bei Radio Frequenzen im 2,4GHz Bereich zu erzeugen was zu verringerter Reichweite und Performance für alle 2.4GHz Geräte (inklusive kabellose Tastatur oder Maus sowie WiFi und viele andere) in der Nähe führen kann. Wir empfehlen alle digitalen Kabellosempfänger mindestens 2m von den USB 3.0 Geräten und deren Verkablung weit weg zu plazieren. Nachstehend können Sie einen Link zur Untersuchung von Intel über Interferenzen mit USB 3.0 finden: http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html Interférences entre USB 3.0 et appareils 2.4GHz Les câbles et périphériques USB 3.0 sont connus pour émettre des interférences de fréquence radio dans la bande 2,4 GHz, que cause une gamme et/ou performance des appareils 2.4 GHz réduite dans la proximité. (Y inclus sont les claviers ou souris sans fil, WiFi, etc.) Nous recommandons de placer le récepteur sans fil numérique au moins 2 mètres loin des appareils USB 3.0 et ses câbles. Voici un lien vers une étude réalisée par Intel au sujet de cette interférence: http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html