Search the Community
Showing results for tags 'disabled'.
Found 1 result
If you've installed a Line 6 driver and the device will not subsequently connect, it is possible that the driver is disabled by the system. How to check if the software is disabled by the system: • Click on the Apple symbol in top-left corner of the screen and go to "About this Mac -> Overview ->System Information -> Disabled Software”. • If there is disabled software, it will be presented with a 10-digit software ID and a file descriptor, similar to "VCN535JA6Y - com.line6.driver.xtaudio" • Take a screen shot or write down the ID (in this example it’s VCN535JA6Y – yours might be different). How to enable software that is disabled by the system: • Uninstall the drivers: https://line6.com/support/page/kb/recording/computer-audio-set-up-and-troubleshooting/how-to-uninstall-line-6-drivers-from-mac-osx-r85/ • Reboot to recovery, holding down Command-R while restarting. • From Menu -> Utilities, open Terminal and type the following (replacing the system ID with yours): “spctl kext-consent disable” “spctl kext-consent add VCN535JA6Y" (replace the VCN535JA6Y with yours if different) “spctl kext-consent enable" • Reinstall the driver. • Open System Preferences -> Line6 Audio-Midi devices and plug the device into the Mac. The device should appear in a few seconds.