Search the Community
Showing results for tags 'formatting'.
Found 2 results
DL4 MKII MicroSD Card formatting instructions
Line6Pete1 posted a article in DL4 MkII Stompbox ModelerThe microSD card must be either the SDHC or SDXC type, 4 GB or larger capacity, and initially formatted by DL4 MkII before it is functional with the Looper. Before using the MicroSD card for longer loops, it will first need to be formatted for the device. Once formatted, your card must include no other existing files on it (other than DL4 MkII’s own Looper- created data). The best idea is to just purchase or dedicate a microSD card exclusively for DL4 MkII use (and, since the Looper will only ever utilize 4 GB, it’s not necessary to use a large capacity card). The process for doing the initial format of your MicroSD card is as follows: WARNING: This process may erase any files you have stored on your MicroSD card. 1. Power on and turn your DL4 MkII’s Selector knob to LOOPER. Be sure the Looper is stopped (not actively recording or playing a loop). 2. Press and hold the ALT/LEGACY button while inserting your MicroSD card into the slot on the back of DL4 MkII. 3. Once the card is fully seated in the slot, release the ALT/LEGACY button when you see its LED start flashing through different colors. DO NOT power off or touch any controls on DL4 MkII while you see the LED flashing, which lasts only a few seconds. 4. When the ALT/LEGACY button’s LED stops flashing, the formatting process is complete. You can then use your microSD card with the Classic Looper or 1 Switch Looper!
Spider Jam Fatal Error Memdevicenand.. My Solution!
tonycsm posted a topic in Spider JamHi guys this is my first post and what I encountered with the pre-owned Spider Jam which I purchased last week. I recently purchased a 6 month old spider Jam which clearly had seen little use by the previous owner. However, after going through some of the functions and whilst cycling through the drums section I eventually encountered the ubiquitous "Fatal Error MemDeviceNand line #70" which after a quick search on Google suggested it was a corrupted firmware problem. The firmware version in my SJ was 2.09. I followed the recommended Line 6 advice/settings on formatting my 1gb SD card in Windows 7 and copied the newly downloaded 2.09 version of the flash memory file ( fw.bin ) but after several attempts at re-formatting and copying the file to the SD card via the computer, I was still getting a message from the Spider Jam that it couldn't read the card which was frustrating to say the least. To cut a long story short... I placed the SD card in the Line 6 Jam SD slot and formatted the card that way instead of by means of the computer and then transferred the file in the computer to the card and Voila...it accepted the card and after installation, the SJ was as good as new. I've read that some people couldn't get the formatting right in order to transfer the data to the SJ so my advice would be to simply place the card in the SJ and format the card that way rather than in the computer... Windows 7 recognised the SJ formatted card and transferred the file to the empty card and it was just a matter of simply placing the card in the SJ, pressing save and selecting firmware update and after installation, it works a treat and without any frustration. It's also a brilliant piece of kit too! What I would ask is why the firmware data becomes corrupted? I'd be interested in finding out what causes the corruption if anyone has an answer! Tony