Search the Community
Showing results for tags 'split signal'.
Hi everyoine. So I've been experimenting a bit with my equipment recently and I've found one thing that concearns me a bit. Bit over what I'm working here with: 1. HX Effects 2. Hughes Kettner 40W amp 3. Torpedo studio What I'm trying to achieve is a split signal from HX Effects to my torpedo (different effects on different lines and then different cab simulations on Torpedo), while at the same moment using FX Loop of my amplifier. What I've done is: So basically signal goes like this: Guitar -> HX input -> Send2 to amp -> Return2 from send of amp -> HX output to return of amp -> amp to torpedo cab input -> HX Send1 to Torpedo line input Because Torpedo is setup to take Amp + Line L inputs, HX outputs are panned: - Main L/R is panned 100% right - Send 1/2 is panned 100% left + I used Send1 block on path B to force signal to this output but I don't know if it does anything... And here's what's bothering me: if you can only use Send1/2 as output of the second path, is the Send2 signal to amp doubled (FX loop + output of Path B)? Funny thing in that situation is that even when my amp is in standby mode I can still hear guitar on left channel... Can anyone tell me if this setup is correct or am I doind something wrong here and can possibly damage my equipment... Thanks Art
Hey guys, first, i hope i am right here with this Topic!? My Problem, or quetion is.. can i record Di. Tracks while i am recording my normal Guitar (through the 500x)? I have a seperate DI Box, so my signalchain is like this: Guitar -> DI Box -> DI Output 1 -> HD500x Gutiar input---> ONE Signal.. but i need two seperated .. DI Output 2 -> HD 500 Vocal input---^ ..one for the distored guitar and one direct clean signal.. is it possible to do that? Or is there any other way? I hope u can help me! greeting, Michael