Search the Community
Showing results for tags 'splitter'.
Found 5 results
-
"auto-calibration" doesn't work at all. I read somewhere that manual calibration was removed at some point early in the firmware lifecycle, a glaring mistake in my opinion. The Helix doesn't give me consistent EXP operation. I have four pedals: Roland EV5, Yamaha EP1, Ensoniq CVP1 and EHX Next Step EXP —none of them work, all of them are inconsistent. The Roland only covered a span of 50% at the full heel to toe range. the Yamaha goes from 0% to 100% to 11%, the Ensoniq goes from 0 to 100% to 0% in a single sweep. I went and researched how these pots work to try and hypothesise why the Helix glitched with TRS pedals of varied brands. I own a BOSS GT8 and it simply works with all of them. What bothers me the most is that the Ensoniq and Yamaha did work properly on the HD500X. One of the reasons I upgraded to the Helix was the possibility of using two external expression pedals, hence the disappointment when they didn't work. The EHX EXP pedal I mentioned didn't work with either the Pod or Helix. EDIT: I avoided expensive and heavy iron cast pedals like the Mission Engineering EP1, or the Ernie Ball that use a fragile cord to crank the pot. I purposely use plastic options because they are lightweight. EHX released a conventional passive expression pedal this past July and M-Audio sell the EX-P pedal which offers a linear and CW/CCW switch that make it compatible. scroll down for a practical solution to avoid modding to use on the Helix and fix the dreaded forward-backward glitch. -
Hi, I wanted to know if it's possible to use a splitter to connect to the Spider IV output to run my head phones and to use as input to my PC and Audacity to record. Any info or suggestions would really be appreciate!!
-
I've recently started playing Rocksmith 2014 on PC and was looking to see if I could play through my M13 and amp rather than use the sound & tones from my laptop. An article here says that you can definitely play through an amp by using a guitar splitter http://steamcommunity.com/sharedfiles/filedetails/?id=208747982. Do any of you know if I can output from my guitar into the Mono Input, then output to my amp (Blackstar 5) via the Mono output and output to my laptop from Output Right via the Realtone cable that comes with the game. I'm wary of trying in case I damage any of my equipment... Many thanks
-
Powering the XD-V55 when using antenna splitter kit
Line6Tony posted a article in XD-V Wireless Products
If two XD-V55 receivers are connected via the antenna splitter kit and the receivers are powered on individually, the receiver that is powered on second will not initiate. The receivers must be powered on simultaneously to work. The antenna splitter kit requires the two SMA MALE to BNC MALE cables that the XD-V55 rackmount kit provides. As such, it is assumed that the receivers are rackmounted AND powered by a power strip. -
Is it possible to use the P180 antennas directly on 3 daisy chained XD-V70 receivers without the XD-AD8 splitter? Or is the XD-AD8 required so that using the antennas without it is useless?
