mark_shaw Posted July 23, 2013 Share Posted July 23, 2013 I would like to have two identical tones with one have a slight delay to make it sound like multiple guitars. Is there a way to set an overall delay on one chain? Thanks! Quote Link to comment Share on other sites More sharing options...
silverhead Posted July 23, 2013 Share Posted July 23, 2013 Try setting up the two Tones to be identical, both with the delay FX at the end (to provide the 'overall' delay). In one Tone, set the Delay Duration, Feedback and Mix level as desired for tonal quality. In the other Tone, use the same Delay FX, but set its duration to be longer, and set its Mix Level at 100%. Control the number of repeats using the Duration setting, as usual. Disclaimer: I've never actually done this, but I think it might come close to achieving what you want. Quote Link to comment Share on other sites More sharing options...
mark_shaw Posted July 23, 2013 Author Share Posted July 23, 2013 I'll give this a try. Thanks! Quote Link to comment Share on other sites More sharing options...
brian6string Posted July 25, 2013 Share Posted July 25, 2013 I've done this. Use a digital delay on just one of the tones, and as silverhead said, set the mix to 100%. Set the delay time to something very short, 24ms seemed to be the sweet spot to me. Pan each of the tones hard to the left and right, I found adding just a touch of reverb to the non-delayed side improves the effect. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.