Evorgeloc Posted March 27, 2016 Share Posted March 27, 2016 Hello, just done a factory re-set as I want to now work methodically with the 1500 after a day of pressing buttons and mucking around. However, during the factory reset, the LCD suggests I should identify and press various buttons I suspect to confirm what they are - but I don't know which button to press - has anybody any idea why factory reset is requesting this.......I am on latest firmware... 1 Quote Link to comment Share on other sites More sharing options...
ArneLine6 Posted March 27, 2016 Share Posted March 27, 2016 The factory reset is: Hold the small encoder knob and the big volume knob pressed while powering up. It looks like you were putting it into a test mode. 1 Quote Link to comment Share on other sites More sharing options...
Evorgeloc Posted March 27, 2016 Author Share Posted March 27, 2016 Thank you - looks like the wrong instructions are in the Pilots Guide - I think you will need to change this asap..... 1 Quote Link to comment Share on other sites More sharing options...
ColonelForbin Posted April 17, 2016 Share Posted April 17, 2016 Thank you - looks like the wrong instructions are in the Pilots Guide - I think you will need to change this asap..... Evorgeloc is correct; the Pilots Guide does say something different from what L6Arne just mentioned: Factory Reset • Factory Reset: Simultaneously press and hold the Master Volume Knob and the *TAP as you power on the unit. * should be 'small encoder' (which is the button between the bluetooth and tap buttons) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.