Jump to content

Evorgeloc

Members
  • Posts

    40
  • Joined

  • Last visited

Everything posted by Evorgeloc

  1. I'm getting the following error - see pic Any ideas anyone? I'm using Mac Big Sur 11.3
  2. Hello, I could use a 2 metre but suppose I'll have to go with 5.....how much and how can I order one?
  3. Hello Schecterdentist, issue has diminished to occasionally- I switch between apps whilst using Firehawk and the app. repeatedly has to re- link to Firehawk, the IPad/Bluetooth link isn't robust and I think we have to live with it. The Firehawk app. is clunky in itself - I have no doubt in a few years it will be slicker but for now, we have to work around and make do.....
  4. Thank you Sing4LTS - I'll give that a try - I suppose this means I have to go through all my patches and adjust each one?
  5. Well, what do you know, latest firmware has solved this problem - All sorted :-) My only gripe is why-o-why don't the Line 6 dudes say, we recognise the problem and we're on to it and should be sorted with the new firmware - save a lot of us trying to help each other and floundering......THE VOLUME PEDAL NOW WORKS AS IT SHOULD - thank you Line 6
  6. Latest firmware solves the problem :-)
  7. I have had an issue when taking mono xlr out from 1500 and sound engineer says I'm giving him way too much signal.....is there an adjustment where I can decrease the output from Firehawk 1500 XLR out
  8. On the side of this post, I have had an issue when taking mono xlr out from 1500 and sound engineer says I'm giving him way too much signal.....is there an adjustment where I can decrease the output to PA?
  9. Has anyone proved/disproved the pedal volume issue with the new FBV III? It would be very helpful to know....
  10. GoodDoc, this is very disappointing and frankly plain wrong - why would musicians request at point of patch change to ensure patch volume is at maximum irrespective of volume pedal position!!!! Come on Line 6, somethings wrong somewhere........please address this..... And thank you Gooddr for your efforts to challenge this
  11. Nick, thank you but I'm struggling with this - I have saved patches with volumes set at low i.e. pedal set to minimum but immediately when I select the patch the volume is at max, whatever the pedal position - this is what I struggle with and speaking frankly, this has to be a malfunction of the software - why when selecting a patch would you have it kick in at maximum volume and then adhere to the pedal once the pedal is moved - certainly not the case on the Spider, Amplifi, Flextone and firehawk effects pedal - this is a 1500 anomaly.
  12. MC, thank you for your comments - I have saved patches with volumes set at low i.e. pedal set to minimum but immediately when I select the patch the volume is at max, whatever the pedal position - this is what I struggle with and speaking frankly, this has to be a malfunction of the software - why when selecting a patch would you have it kick in at maximum volume and then adhere to the pedal once the pedal is moved - certainly not the case on the Spider, Amplifi, Flextone and firehawk effects pedal - this is a 1500 anomaly.
  13. Hey Nick, thank you for your interest - here's the post http://line6.com/support/topic/19425-fbv-shortboard-volume-pedal-issues/ Whilst I appreciate your suggestion regarding the levelling of volumes and I have done this to a certain extent, however I need the fine adjustments of the volume pedal.....being able to make a small adjustment to increase/decrees volume.
  14. Cap, I think noticed somewhere that you have an FBV III on order? I was wondering if you would mind letting me know if it solves the volume pedal issue?
  15. MC, thank you for taking time to respond. With approx 15 patches used per gig, it's not possible to have them all exactly balanced, given the variables of the venue and the other instruments. I need fine adjustment on stage and sometimes I need a little "extra" to stand out. Yes I could and do use the guitar vol control but this then can effect tone (dependent on patch of course). Above all else though, this should not happen - it is an error that Line 6 need to fix. Switching to a patch which will then play at max volume where ever the pedal position is and then as soon as the pedal is touched, it takes control and the pedal position commands the volume makes it unusable, unless you do as I do and switch patch but don't play a note until you have moved the pedal by say a millimetre. Come on line 6, get with this one, either say it will be solved in the FBV III or fix it on the FBV II but don't leave your customers floundering......please
  16. FBV II 100% compatible??? But volume control doesn't work fully - when switching patches, new patch always kicks in at max volume where ever pedal is positioned - see my post on this subject - be helpful to have some learned comment on this issue from Line 6 please
  17. I agree gooddr - this is really bugging me - played an awesome gig on Saturday but had the pressure of dealing with volume issues - I just don't need it. I do find it strange that line 6 let this sort of dialogue go on and don't interject with advice/comment/solution.....
  18. Hello, has anyone experienced when using the app. searching the iCloud for a tone but your previous search results remain - the only way to clear seems to be to shut app. down and start again - that's a nuisance and the app has to re-sync to 1500 which takes time.....
  19. Thank you for your reply, I assume FB3 won't help when it comes out in May......seems strange to provide Firehawk 1500 with Variax connection but no Firmware update ability for the Variax. Would you happen to know what if any benefit there might be by updating the firmware on the Variax, assuming my firmware isn't the latest version. I may be able to borrow PodX3 so I assume all I would then need is a cable....what sort of cable might that be to connect VDI (is that the Variax socket on the X3) TIA
  20. I've purchased a second hand - probably 2 year old JTV89.....which I'm running into a Firehawk 1500, via Variax cable. I have no idea how to check/change/Reflash(whatever that means?) firmware - can't see reference to it in Variax Pilots guide - I know it's a basic question but please would somebody kick me off in the right direction. TIA
  21. Yes - think I'm learning that.....and there is something rather rewarding of coming up with a good workable solution :-)
  22. I've leaned a lot from you - thank you for taking the time - much appreciated - I think the main lesson here is to balance the volumes.....
  23. Thank you MC, having previously used a Spider which didn't have this issue (each patch came in at the volume that the pedal is positioned in), it is a big deal. I happen to have a separate volume pedal - so where should I put it (yes I've left myself wide open :-) The reason I need a volume pedal is the covers bands I play in have a wide range of songs and dynamics so I have to constantly vary my sounds and volume dependent on song and where we are in the song - thank you for taking the time to advise....
  24. Thank you GearHead - I'm not convinced, why when I switch to another patch does the patch play at max volume - even though pedal is set very low - then if I move by hand the pedal by a millimetre louder, the patch is immediatly at the correct volume for the pedal. Setting a min/max shouldn't affect this? Be great if you can tell me I'm wrong and please accept my apologies if you are on the nail here, I just can't see it....
×
×
  • Create New...