fokoracer Posted January 8, 2017 Share Posted January 8, 2017 This seems like a basic question and I must be missing something obvious....can't seem to figure it out though. Setting up snapshots, I have no problem bypassing blocks from one snap to another. However, if I try to alter parameters, I can't seem to make an altered parameter stick on one snap and not effect the others. For example what I'd like is Song A preset: Snap 1 (clean): amp drive 5 Snap 2 (lead): amp drive 8 What I've been trying over and over is set the clean snap > switch to lead snap> set amp drive to 8 and press save-save. when I switch back to clean snap, the drive is at 8 rather than 5. What am I missing? This procedure works for bypassing blocks. Reading the manual I seem to be doing it correctly but to no avail. Thanks in advance Fabian Quote Link to comment Share on other sites More sharing options...
pilottes Posted January 8, 2017 Share Posted January 8, 2017 You simply forgot to push the button while turning. White bracket will apper indicating that this parameter in now in slave to a controller (in this case snapshot). Save your preset new before setting a different snapshot. If you set the recall mode in the global settings you can go back and forth between snapshots and the parameters will swill be kept as you set them. Save the preset when you are satified. Quote Link to comment Share on other sites More sharing options...
shanecgriffo Posted January 8, 2017 Share Posted January 8, 2017 yes, a button push and then turn will do the trick.. it'll become second nature one day 😉 Quote Link to comment Share on other sites More sharing options...
fokoracer Posted January 8, 2017 Author Share Posted January 8, 2017 Ahhhh yes ....thank you!! . That works! Is there a similar maneuver in Helix Editor? Quote Link to comment Share on other sites More sharing options...
bsd512 Posted January 8, 2017 Share Posted January 8, 2017 Ahhhh yes ....thank you!! . That works! Is there a similar maneuver in Helix Editor? Yes, a key and mouse click combination does it, can't remember off the top of my head which one. Command or option + right or left mouse. One of them should work, sorry don't have the Helix in front of me to confirm. Quote Link to comment Share on other sites More sharing options...
fokoracer Posted January 8, 2017 Author Share Posted January 8, 2017 Yes thanks....it is option-click on a Mac. F Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.