Yosser70 Posted February 23, 2017 Share Posted February 23, 2017 Hi all. I've just got my son a Variax 500 off eBay for his birthday. One of the reasons for getting it was the ability to easily use altered tuning. I didn't realize it needed to be attached to a computer to do this. I understand that there's a little interface that Line 6 make but they are around £100! I could pick up a used Pod XT live for less than that. Firstly would a XT live work as an interface between the Variax 500 and a computer. Secondly can I still get a version of Workbench that will work and lastly can I get the required cables? Sorry for all the questions and thanks in advance. Quote Link to comment Share on other sites More sharing options...
BillBee Posted February 23, 2017 Share Posted February 23, 2017 Yes for the XTL/X3L or HD500. Yes Workbench will work with the XTL/X3L/HD500 Yes you can get the Variax cables. I would look at an HD500 or X3L unless you get a killer deal. Hope that helps. :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.