craigl6 Posted March 8, 2017 Share Posted March 8, 2017 I have replaced my Toneport with another hardware interface. Every time I open Pod Farm 2.5, I have to go into the settings and manually change it from input #1 to input #2 since the correct input is apparently not stored. Is there some workaround to get it to use/store the correct input port? Thanks. Quote Link to comment Share on other sites More sharing options...
Triryche Posted March 8, 2017 Share Posted March 8, 2017 Unfortunately there is not, it's a PITA. Quote Link to comment Share on other sites More sharing options...
Triryche Posted March 10, 2017 Share Posted March 10, 2017 I think it should save the setting for Tone A though, but Tone B will default to Same as Tone A. Quote Link to comment Share on other sites More sharing options...
BillBee Posted March 10, 2017 Share Posted March 10, 2017 You know, I never looked to see if PodFarm is using a config file with the default settings in it. Might be it has one and can be opened in an ascii editor and changed. Just thinking. 1 Quote Link to comment Share on other sites More sharing options...
Triryche Posted March 10, 2017 Share Posted March 10, 2017 You know, I never looked to see if PodFarm is using a config file with the default settings in it. Might be it has one and can be opened in an ascii editor and changed. Just thinking. Thanks for the distraction!! Not like I don't have enough going on this weekend, now I have to look for this. :angry: BillBee has been reported to the authorities!! :ph34r: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: 1 Quote Link to comment Share on other sites More sharing options...
BillBee Posted March 10, 2017 Share Posted March 10, 2017 Anything to keep my mind of the tax work I need to get at T. A Spider Valve HD100 is on its way and has no tubes!!! Alert alert!!! Quote Link to comment Share on other sites More sharing options...
sjuras Posted March 13, 2017 Share Posted March 13, 2017 Hi guys, I would like to ask you about Podfarm 2.5. Is Podfarm program compatible on M-Audio soundcard. I have M-audio soundcard and I thinking about Podfarm 2.5. Is it possible? Thanx. Quote Link to comment Share on other sites More sharing options...
craigl6 Posted March 17, 2017 Author Share Posted March 17, 2017 I looked all around for a config file, but couldn't find one. I just use my DAW now instead. Quote Link to comment Share on other sites More sharing options...
Littlebear61 Posted June 15, 2018 Share Posted June 15, 2018 connecting line mixer to a line6 ux2 How to set POD Farm to see the Lines inputs? Quote Link to comment Share on other sites More sharing options...
Gaz_Ham Posted June 16, 2018 Share Posted June 16, 2018 Does the line mixers have individual outputs for each channel you have used? Each out put would need to go in to a separate input in the ux2 to be able to send them individually to podfarm / your DAW. Unless the inline mixer has some great features you want to use, it is a little redundant, I feel. You might be better going straight in to your ux2. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.