reggibeasley Posted April 25, 2017 Share Posted April 25, 2017 Hi guys. I use push and turn in snaphsot mode to adjust specific settings to individual blocks- such as gaining the amp up in snapshot one, then gaining it down in snapshot 2. What I can't seem to figure out is how to remove the push and turn so that it goes back to being universal across all snapshots. Thanks for the help in advance. Quote Link to comment Share on other sites More sharing options...
MonkeyXT Posted April 25, 2017 Share Posted April 25, 2017 Hold the bypass button and then immediately push the control encoder knob for the parameter you wish to de-assign - that's the quickest way - brackets will vanish immediately. (I've accidentally twist-turned quite a few times....) 4 Quote Link to comment Share on other sites More sharing options...
reggibeasley Posted April 25, 2017 Author Share Posted April 25, 2017 Thank you sir! Quote Link to comment Share on other sites More sharing options...
MonkeyXT Posted April 25, 2017 Share Posted April 25, 2017 Thank you sir! You are most welcome. Cheers Quote Link to comment Share on other sites More sharing options...
zooey Posted April 25, 2017 Share Posted April 25, 2017 Cool, I didn't know about that one! What I've always sooner is go into controller assign for that parameter, and select none. Quote Link to comment Share on other sites More sharing options...
Joepeggio Posted April 25, 2017 Share Posted April 25, 2017 Sweet shortcut!!! Quote Link to comment Share on other sites More sharing options...
Gkf9 Posted April 26, 2017 Share Posted April 26, 2017 This will probably sound silly, I'm a complete noobie to the Helix, but why do you have to get the white text up in brackets per snapshot? Think I've been just turning the nob without pushing it too, then saving per patch. Quote Link to comment Share on other sites More sharing options...
klangmaler Posted April 26, 2017 Share Posted April 26, 2017 By the way: https://helixhelp.com/snapshots/ Quote Link to comment Share on other sites More sharing options...
zooey Posted April 26, 2017 Share Posted April 26, 2017 Not sure I understand what you're saying, but without the brackets, that parameter isn't controlled by snapshots (or any other controller), so it has the same value in every snapshot. Quote Link to comment Share on other sites More sharing options...
Gkf9 Posted April 26, 2017 Share Posted April 26, 2017 Not sure I understand what you're saying, but without the brackets, that parameter isn't controlled by snapshots (or any other controller), so it has the same value in every snapshot. OK thanks, I understand now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.