Saving IR's to a preset

[rsvette12 5]

Hi Guys how do I save an IR to a preset so I dont have to keep loading it over and over - bought some Glenn presets and I cant put them in block ir location because I have Fremens there - (Both are great products) - thanks

[rsvette12 5]

Figured it out you save to library that overwrites the preset to maintain the settings made   :)

[klangmaler 128]

You don't save an IR to a single preset.

There is the impulse panel where you can load IRs.

You have to correlate the IR number of the IR block (within a preset) with the number of the desired IR in the impulse panel.

So you can use a single IR for multiple presets.

[rsvette12 5]

You don't save an IR to a single preset.

There is the impulse panel where you can load IRs.

You have to correlate the IR number of the IR block (within a preset) with the number of the desired IR in the impulse panel.

So you can use a single IR for multiple presets.

 

Thanks aware of that but in order to retain the IR when you go back to the preset you must do what I stated

[klangmaler 128]

Check this video out, too:

https://www.youtube.com/watch?v=e_lTJNg2Ffo

[rsvette12 5]

Will do thanks

[BarrySandman 0]

Do i realy need to remeber ? ex.if i bouth and IR-say a good finished preset--- to the Number i load it off cause i can fine the number easy..but if i choose it to be with that preset how do i save it?..yes im stupid i know,,but try to be easy on my

[soundog 179]

Let's try again. After you insert an IR block into a preset effects chain, select the number of the IR slot you want the preset to use (it will also list the name of the IR). Then save the preset. The preset will then always reference the same IR slot number when you load the preset. If you change the IR in that numbered slot, the preset will use the new IR. So keep them organized.