mapletop Posted January 12, 2019 Share Posted January 12, 2019 ive heard this but where or how do you make a octave pedal?so i can assign it to a button.thanks looking for the leslie west thing Quote Link to comment Share on other sites More sharing options...
teo-torriate Posted January 13, 2019 Share Posted January 13, 2019 - add a block (preferably in front of your amp, because the tone will be more precise) - chose a model from the "Pitch/Synth"-list, for example "Simple Pitch" - turn the "Interval" to "-12" (one octave down) or "+12" (one octave up) - adjust the other parameter (Cents, Delay etc.) to achieve "your sound" - push the "MODE"-switch to select the stomp mode - move the joystick to your block (Simple Pitch) - touch the desired footswitch for a second, the assign menu will be opened - press "OK" (button 6) Have fun! :-) 1 Quote Link to comment Share on other sites More sharing options...
PiFromBRC Posted January 13, 2019 Share Posted January 13, 2019 What he said above, but here's what I do to sim feedback: Set the minimum to +12 or +24, same interval for the maximum, then use an expression pedal set to adjust mix with minimum set to zero and max set around 75%. Works pretty damn good and will do until the powers at L6 determine that we've whined an appropriate amount to put a feedback stomp sim in the fx pool. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.