Old-Rocker Posted June 15, 2019 Share Posted June 15, 2019 I'm not sure I have the correct heading for this question,but here goes. Is it possible with the Stomp to do the following ? send fuzz/overdrive Stomp pedals to front input of a valve amp Plus a left/right signal path,with Amp modelling & L/R effects to 2 x Monitor type amp/speakers(such as Laney IRT-X),so 3 routes? I've downloaded the Manual & it looks like it may be possible,but just thought i'd ask,because i'm usually wrong with modelling/effects use.(smiley). Quote Link to comment Share on other sites More sharing options...
Kilrahi Posted June 15, 2019 Share Posted June 15, 2019 It would depend on what complexity you want. If all three paths differ significantly than not really, no. You run out of blocks far too quickly. Quote Link to comment Share on other sites More sharing options...
Old-Rocker Posted June 16, 2019 Author Share Posted June 16, 2019 10 hours ago, Kilrahi said: It would depend on what complexity you want. If all three paths agree significantly different than not really, no. You run out of blocks far too quickly. Thanks Kilrahi.i'll read the Manual some more to find out what "blocks" are,i've read that 6 are allowed,but I don't know if that is a total figure or it can be per "PATH". I don't own a Stomp yet,but I'm doing as much learning as I can before "buying" one on 30 days return. Thanks,again. Quote Link to comment Share on other sites More sharing options...
silverhead Posted June 16, 2019 Share Posted June 16, 2019 A 'block' is any signal processing element in the path. An amp is a block, an FX selection is a block, a VOL pedal is a block, an Input/Output element is a block, etc. Each block requires some amount of signal processing (DSP) capacity ; some blocks require more, others less. By 'running out of blocks' we mean not having sufficient DSP capacity remaining to add more blocks. Some devices have dynamic DSP management, meaning you can add blocks freely until the capacity is reached. Others ensure that the capacity is never reached by limiting the number of blocks allowed. Quote Link to comment Share on other sites More sharing options...
Old-Rocker Posted June 16, 2019 Author Share Posted June 16, 2019 So,from reading the Manual, it looks like a total of 6 blocks maximum are available across all paths,so if 2 paths where used a maximum of 6 blocks divided between both paths,is this correct ? Thanks. Quote Link to comment Share on other sites More sharing options...
Kilrahi Posted June 16, 2019 Share Posted June 16, 2019 3 hours ago, Old-Rocker said: So,from reading the Manual, it looks like a total of 6 blocks maximum are available across all paths,so if 2 paths where used a maximum of 6 blocks divided between both paths,is this correct ? Thanks. Yes, that's correct. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.