Schivosa Posted February 7, 2020 Share Posted February 7, 2020 At gigs, I am connecting the Helix to an FRFR speaker, a 2x12 cab and the front of house. How can I adjust presets to have the IR block sent to the FRFR and FOH but not the 2x12 cab? I would like to have the 2x12 using it owns speakers instead of an IR emulating another cab. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 7, 2020 Share Posted February 7, 2020 Put your cab/ir in a path split. Send Path A (no cab) to the stage amp/212 via 1/4" L/Mono out. Send the Path B (with cab) to the XLR Outs with one side to the stage FRFR and the other to FOH. There's other ways, but this seems simplest to me. Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted February 8, 2020 Share Posted February 8, 2020 Right before the IR block, insert a send block. Assign that send block to whichever output you are going to 2x12 speaker Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.