amsdenj Posted April 5, 2020 Share Posted April 5, 2020 In these trying times we have to find new ways to play music together. Remote jamming/rehearsal over the Web isn't perfect, but its better than not playing. I put together a post on how to use Helix/HX Stomp with Jamulus for on-line jamming: https://jimamsden.wordpress.com/2020/04/04/remote-jamming-with-helix-and-jamulus/. Good luck everyone, and stay healthy. 1 2 Quote Link to comment Share on other sites More sharing options...
Thark Posted April 6, 2020 Share Posted April 6, 2020 Excellent!. I’m going to have close look at this. Cheers, Keith Quote Link to comment Share on other sites More sharing options...
jester700 Posted April 6, 2020 Share Posted April 6, 2020 Excellent post! Tech nerd note: audio latency is actually ~1ms/ft, not ~1ms/10ft. So 50 ft of distance gives you roughly 50ms delay. Quote Link to comment Share on other sites More sharing options...
Indianrock2020 Posted September 11, 2021 Share Posted September 11, 2021 Thanks for providing this. I'm just now getting around to trying my Helix driver with Jamulus. I've been using Jamulus with the ASIO driver for my small Mackie mixer ( running Helix and vocal mic into the Mackie) but now I want to explore running two instances of Jamulus so others can adjust my vocal mic and Helix guitar levels independently. Quote Link to comment Share on other sites More sharing options...
amsdenj Posted September 12, 2021 Author Share Posted September 12, 2021 You might give SonoBus (sonobus.net) a try. If you're jamming with people close by who have 1G Internet, it works very well and is much easier to use. Quote Link to comment Share on other sites More sharing options...
Indianrock2020 Posted September 12, 2021 Share Posted September 12, 2021 I do use sonobus with some others in the Seattle area. Since I have the time and there is already a convenient Thursday mid-day session on Jamulus, I've started participating in that. I'm looking at running two instances of Jamulus, with the Helix driver set up on one and my regular "interface" ( mackie mixer) serving vocals and backing tracks to another instance of Jamulus. There is also a solution using Reaper's rearoute. Then you have an approach using ASIO Link Pro -- too much info to digest :-) But even just continuing with guitar/vocal/tracks through the Mackie only I've found that panning before sound hits Jamulus or Sonobus makes a big difference. When I was struggling to get IEMs dialed in someone pointed out the advantages of a stereo mix over mono. They likened mono to listening to six other musicians who were standing single file facing you. So first in line is the piano and it's too loud, so you turn up the level of the drummer who is 3rd in line. Then you can no longer hear the piano or others adequately, and on and on and on. But if you can put the drummer and bass in your left ear, say panned out 50%, the piano and lead vocal in the right ear, etc etc and possibly also lower or even remove some sources you don't need, you can hear what you need at lower volumes. In Jamulus etc you can't mute people because you won't hear them talking, unless they're using multiple sessions so you could mute their instrument if desired. ( or if they are panning ahead of Jamulus you could pan them in Jamulus to get what you need from them) My brief experiment with this panning yesterday did make a big difference. It was in Sonobus but my vocal was totally in the left ear, with most of the guitar in the right and it made it easier for all of us to hear what I was doing more distinctly. Quote Link to comment Share on other sites More sharing options...
Indianrock2020 Posted September 12, 2021 Share Posted September 12, 2021 It appears the Helix Asio doesn't have good performance....showing 65 Ms delay in jamulus, as opposed to 43 or so on the Mackie driver. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.