DaJuice007 Posted April 22, 2020 Share Posted April 22, 2020 Is there anything documented on how to use the new feature in Helix FW 2.90 for Split > Dynamic? Thanks Quote Link to comment Share on other sites More sharing options...
themetallikid Posted April 22, 2020 Share Posted April 22, 2020 Should be as simple as making the split block set to the Dynamic setting, and then playing with the threshold/release numbers to get it to react how you want it to. pretty straight forward. Quote Link to comment Share on other sites More sharing options...
willjrock Posted April 22, 2020 Share Posted April 22, 2020 (edited) Its all right there in the 2.9 thread. You know that stuff IS meant to be read :) Knob 1 (Threshold)—Signals below the Threshold are routed to Path A; signals above the Threshold are routed to Path B Knob 2 (Attack)—Determines how fast the signal routes to Path B once reaching the Threshold Knob 3 (Decay)—Determines how fast the signal returns to Path A once falling below the Threshold Knob 4 (Reverse)—Swaps dynamic path routing. When set to "On", signals below the Threshold are routed to Path B and signals above the Threshold are routed to Path A Edited April 22, 2020 by willjrock 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.