resrocks Posted July 1, 2020 Share Posted July 1, 2020 Hi all I've just bought a POD GO and i'm using it as a USB inteface. The only issue is, the POD controls the volume of the DAW, so when it's turned up loud enough to hear the guitar the playback in the DAW is far too loud. Any help would be great. Thanks Les Quote Link to comment Share on other sites More sharing options...
silverhead Posted July 1, 2020 Share Posted July 1, 2020 Lower the volume in your computer's sound settings. Quote Link to comment Share on other sites More sharing options...
resrocks Posted July 1, 2020 Author Share Posted July 1, 2020 Hi Yes i tried that, it has no effect whatsoever, I've managed to turn down the USB level in the POD but now even though the guitar is loud enough, there's hardily any output when its recorded' Quote Link to comment Share on other sites More sharing options...
spaceatl Posted July 3, 2020 Share Posted July 3, 2020 You are approaching it backwards...turn up your mix to match the GO....Your mix will likely slam a little bit...just turn down the master so it's comfortable and balance the mix to the GO...If you turn the GO down then you end up with a very weak track...Please keep in mind that DRY tracks will be weak by default....The mix you use to monitor recording will NOT be the same as post. jus sayin... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.