boynigel Posted May 28, 2022 Share Posted May 28, 2022 Every time, on any patch, when I assign a graphic eq block, my LT keeps automatically assigning it to foot switch 9. When I go to the menu to unassigned it, it’s already set to “none”. So annoying. Firmware glitch? Quote Link to comment Share on other sites More sharing options...
silverhead Posted May 28, 2022 Share Posted May 28, 2022 These sorts of things are often resolved by a factory reset. Perform a system backup first, and then restore from backup after the reset. 1 Quote Link to comment Share on other sites More sharing options...
boynigel Posted May 28, 2022 Author Share Posted May 28, 2022 On 5/28/2022 at 3:59 PM, silverhead said: These sorts of things are often resolved by a factory reset. Perform a system backup first, and then restore from backup after the reset. Didn’t work. I backed up, restored, same result. Still can’t unassigned the eq block from foot switch 9. The only workaround is to assign the eq block to another foot switch. But that’s flawed too in the event that all the other switches are already assigned to blocks. In this case it sets it up so that the foot switch toggles between the already assigned block, and the eq block. More frustrating is that I don’t even want it assigned to ANY foot switch. i don’t know about others but I can’t wait for 3.15 to be a fuzzy memory. It’s the first truly buggy version I’ve experienced. I had another issue that Line6 couldn’t even solve. Quote Link to comment Share on other sites More sharing options...
boynigel Posted May 28, 2022 Author Share Posted May 28, 2022 On 5/28/2022 at 5:03 PM, boynigel said: Didn’t work. I backed up, restored, same result. Still can’t unassigned the eq block from foot switch 9. The only workaround is to assign the eq block to another foot switch. But that’s flawed too in the event that all the other switches are already assigned to blocks. In this case it sets it up so that the foot switch toggles between the already assigned block, and the eq block. More frustrating is that I don’t even want it assigned to ANY foot switch. i don’t know about others but I can’t wait for 3.15 to be a fuzzy memory. It’s the first truly buggy version I’ve experienced. I had another issue that Line6 couldn’t even solve. Okay I found the bug. I was pulling the eq block from my Favorites list. Perhaps that particular one was corrupted because if I start from scratch and dial in my eq curve there are none of the aforementioned issues. Still though- DOWN with 3.15! Quote Link to comment Share on other sites More sharing options...
datacommando Posted May 28, 2022 Share Posted May 28, 2022 On 5/28/2022 at 10:15 PM, boynigel said: Okay I found the bug. I was pulling the eq block from my Favorites list. Perhaps that particular one was corrupted because if I start from scratch and dial in my eq curve there are none of the aforementioned issues. Still though- DOWN with 3.15! Hi, It’s not corrupted, and it’s not a bug, it’s a feature. If you have already assigned an effect block to a footswitch, and then add it to your favourites folder, when you recall that favourite it is applied to the same footswitch. Here’s a quick video showing the features and functions included in favourites. Hope this helps/makes sense. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.