sebabetto Posted January 6, 2023 Share Posted January 6, 2023 hi! I don't know how to set the leds in snapshot mode behave like in stomp mode. when I'm in snapshot mode, playing with no stage light is difficult to see the stomp switches. Quote Link to comment Share on other sites More sharing options...
silverhead Posted January 7, 2023 Share Posted January 7, 2023 Unfortunately I don’t think that can be done. A quick read of the relevant sections of the manual describes a Global Setting that allows you to choose between Dim/Lit and Off/Lit while in Stomp mode. This option is not available for Snapshot mode, meaning the LED is Lit for the currently selected Snapshot but the other Snapshot LEDs are Off, not Dim. You could add reflective tape or something to the top of the POD Go to provide a visual marker for your footswitches in dim light. Quote Link to comment Share on other sites More sharing options...
grdGo33 Posted January 7, 2023 Share Posted January 7, 2023 I've seen some pics where people were using some sort of tiny flexible led; something like this would likely do the trick; https://www.aliexpress.com/item/1005005019902194.html or this https://www.aliexpress.com/item/1005003251345187.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.