Wondo100 Posted March 3, 2023 Share Posted March 3, 2023 Please forgive me on this one as I stepped away from the Helix controlling my amps for a while. I am totally drawing a blank on how to go into Command Center and have a snap shot send a MIDI command to change a channel on my amp. I used to know how to do this, but now keep coming up short on getting it to work. Thanks Quote Link to comment Share on other sites More sharing options...
rd2rk Posted March 3, 2023 Share Posted March 3, 2023 Make sure Helix and your amp are using the same MIDI Channel. Assuming that your preset is saved with SS1 as default, set InstantCommand1 to the proper PC/CC#/Ext Amp setting to select the default amp channel. In SS2 set IC1 to the desired PC/CC#/Ext Amp setting for the desired amp channel. Continue as required. Each SS that you use needs to be configured as above. Don't forget that unless Global Settings>Preferences>Snapshot Edits is set to RECALL, you need to SAVE the Preset after each change to a SS before moving to the next one. Quote Link to comment Share on other sites More sharing options...
Wondo100 Posted March 3, 2023 Author Share Posted March 3, 2023 Well, I essentially give up. I cannot get this to work. I am even bringing a preset up that had this all built in. It is from one that you and I built a while ago and no go. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted March 3, 2023 Share Posted March 3, 2023 Attach the preset and give me some details about your amp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.