Sending to FOH & FrFr

[shredacuda]

I'm putting a stomp xl on my board for backup to my helix, how can I send the signal and control volume to my headrush, and unity gain to FOH like I do with my Helix?

[brue58ski]

You'd have to use the normal outputs, the headphone outputs or add a send at the end of your path and use that output. Those are the only outputs I can see. In global settings there is a selection to determine what the volume knob controls. If you set it to phone, it only controls the headphone output. That then means, like the helix, the ouputs are at unity gain. See page 51 of the manual. I see no other options.

[DunedinDragon]

The simplest solution if you already have your signal gain staged for FOH just attach your Headrush speaker to a separate Aux out on the mixer and set the level on that Aux out for your guitar channel to what you need as far as volume.

[themetallikid]

Just as an added option.  Most (in my experience) modern FRFR speakers have a direct out that just pass audio.  For myself (floor not stomp xl) I just use the 1/4 out to my wedge, however, I have used the direct out from my wedge too when I first started as well.  I'm not familiar with the Headrush, just throwing it out there as an option if you dont have an available HX output to use.