Controlling effects via midi

[Daniquito]

Hi, I know it's possible to change presets and snapshots via midi (I will use TouchOSC to do so) but is it possible to control effects parameters such as decay reverb, delay, mix effect etc in real time via midi ?

Thanks for help.

[rd2rk]

On 12/11/2023 at 10:35 AM, Daniquito said:

Hi, I know it's possible to change presets and snapshots via midi (I will use TouchOSC to do so) but is it possible to control effects parameters such as decay reverb, delay, mix effect etc in real time via midi ?

Thanks for help.

 

In HX Edit, navigate to the parameter you want to control. right click, select MIDI CC and assign the CC# you want to use.

SAVE the preset.

 

On the device depends on the device. Read the Manual for your device.

[silverhead]

The MIDI section of the manual lists some CC messages that are reserved for global use, including EXP pedals. So I expect that if you assign, for instance, an FX Mix parameter to EXP-1 and then send a MIDI CC#1 command it will set the pedal position (and hence the Mix parameter) to a corresponding  value.

[Daniquito]

On 12/11/2023 at 11:47 PM, rd2rk said:

 

In HX Edit, navigate to the parameter you want to control. right click, select MIDI CC and assign the CC# you want to use.

SAVE the preset.

 

On the device depends on the device. Read the Manual for your device.

Thanks

[Daniquito]

On 12/11/2023 at 11:49 PM, silverhead said:

The MIDI section of the manual lists some CC messages that are reserved for global use, including EXP pedals. So I expect that if you assign, for instance, an FX Mix parameter to EXP-1 and then send a MIDI CC#1 command it will set the pedal position (and hence the Mix parameter) to a corresponding  value.

Thanks