HX Stomp and midi switcher

[vincentm77]

Hi everyone,

I have an HX stomp XL and I would like to use a midi footswitch controller with 5 switches

Is it possible to 

- assign e.g. snapshot 1 of preset 10 to switch 1 of the midi switcher

- assign e.g. snapshot 4 of preset 10 to switch 2 of the midi switcher

- assign e.g. snapshot 2 of preset 12 to switch 3 of the midi switcher

- assign an effect block (e.g. chorus) to switch 4 of the midi switcher 

- assign another block (e.g. FX send/return bypass) to switch 5 of the midi switcher 

?

In other words, is it possible to assign to any switch of my midi controller any snapshot (of any preset) set up on my HX Stomp ?

 

I really like the HX Stomp XL, and I know that 4 footswitches is already a lot, but I wish I would have 5 footswitches aligned in front of me (e.g. CLEAN, CRUNCH, DISTO, SOLO, EFFECTS)

 

thanks

Vincent

[DunedinDragon]

I don't see any problems with what you want to do other than making sure you have a capable MIDI controller as MIDI controllers aren't always equal.  Just do your homework and good luck.

[Schmalle]

On 4/22/2024 at 10:48 AM, vincentm77 said:

[...] Is it possible to assign to any switch of my midi controller any snapshot (of any preset) set up on my HX Stomp ?

The MIDI controller must be able to send a series of PC and CC messages with one button.

E.g. snapshot 2 on preset 02A would need two MIDI messages: PC:003 followed by CC69:01. You don't need to come up with these values since they are displayed in the preset list menu on the device.

[vincentm77]

Thanks a lot Dunedindragon and Schmalle for your help