I cannot record. I'm not getting a signal.

[357mag]

I picked up a POD X3 Pro because I wanted one (now I have both the X3 Bean and the X3 Pro). Problem is I cannot record my guitar with the X3 Pro. I chose the correct driver under ASIO driver in Reaper. Under enable inputs I chose what I usually choose and that is First Mix L and Last Tone 1 Dry. 

 

I armed a track but when I hit CTRL + R to record nothing happens. I don't get a signal coming into the track. 

 

So I'm suspecting that something is not set correctly somewhere. I have posted two screenshots for you to look at.

 

Don't know what is wrong.

[silverhead]

What are the Output settings in your POD preset? Make sure that whatever output maps to the USB Mix L channel  is specified.

 

Also, aren’t there 8 USB channels? Why are you cutting out the 8th channel by specifying the Last as 7?

[357mag]

It says Tone 1 On underneath that it says Match Studio Direct Digital 48KHZ Rate and 0DB Level and S/PDIF Format.

 

Don't see a USB Mix L channel. Don't know anything about that.

 

Under the word Last there are 8 USB channels. You told me awhile back to choose 7. Tone 1 Dry so I could have a totally dry guitar signal recorded in Reaper. Channel 8 is called Tone 2 Dry. I'm just recording Tone 1 wet and Tone 1 dry.

 

Anyway right now I'm not concerned about recording two tones. I have to figure out why I'm not getting any signal.

[357mag]

I just powered up my X3 Bean just so I could look into the screen. I don't see anything different about the parameters in the X3 Bean than what I see in the X3 Pro.

Beats me why I'm not getting a signal.

[357mag]

I got it fixed now. I won't be using the X3 Pro. I will only be using the X3 Bean.