kerryhall1 Posted January 14 Share Posted January 14 I have a preset that splits, hard pans left and right, applies two preamps, then on the merge continues to be hard panned left and right. I normally have this sent to my amp via left and right out, I can hear both outputs in my stereo cab. I recently added a 2nd split (again hard panned left and right), sent one side of this split to a cab sim, then send that to sends 1+2. (For inear monitoring) I have tried four different things: 1. no 2nd split, straight to sends 1+2. I hear both preamps hard panned in my inears as I would expect. (of course super high frequency / buzzy because there's no cabinet!) 2. no 2nd split, but using a dual cab sim, to sends 1+2. It sounds like a normal distorted guitar amp in my inears now, but the signal is mixed down to mono. 3. 2nd split, sending to L+R out and sends 1+2. I tried a dual cab sim bypassed (or any stereo block, but bypassed) to keep the final split there, and I hear the output from the send, but only on the right side! (afaik you can't have a split without *some* block being in the path, but maybe there is a way to do that) 4. If I now unbypass the dual cab sim, same configuration as scenario 3, I can hear the output in both ears, but the dual cab sim mixes down to mono again. I want to be able to split, send normal output to L+R outs, split right before the end and have a stereo cab sim so I can hear both amps, one L and one R, in sends 1+2. What's going on here? Is a dual cab sim actually mono? Quote Link to comment Share on other sites More sharing options...
rd2rk Posted January 14 Share Posted January 14 2) The Dual Cab's 2 speakers can be panned hard L/R. By default they're centered, which sounds like MONO. 1 Quote Link to comment Share on other sites More sharing options...
kerryhall1 Posted January 14 Author Share Posted January 14 I didn't see a setting for this in the menu for the dual cab. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted January 14 Share Posted January 14 On 1/13/2025 at 5:38 PM, kerryhall1 said: I didn't see a setting for this in the menu for the dual cab. Scroll Down in HX Edit, Page Right on the box. Quote Link to comment Share on other sites More sharing options...
kerryhall1 Posted January 14 Author Share Posted January 14 I'm using the Helix Rack, can I do it from there? Quote Link to comment Share on other sites More sharing options...
SaschaFranck Posted January 14 Share Posted January 14 On 1/14/2025 at 7:26 AM, kerryhall1 said: I'm using the Helix Rack, can I do it from there? Of course. Just navigate to the right on the cab block. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.