ElPuni Posted Wednesday at 08:54 AM Share Posted Wednesday at 08:54 AM Hello, let´s see if someone can help: with HX Stomp I feel some fuzziness using my bass with my 2 different distortions and have found it it corrected by adding a cab block, but I don´t like it activated with my clean sound, so: -All 8 slots are in use, FS1 assigned to Dist1, FS2 to Dist2, FS3 to a different effect (chorus) -By default Cab block must be disabled (clean sound) and if I activate any of my 2 distortion blocks I need to have the cab block activated also. I can assign FS1 to Dist1+Cab, but I´d need to have the Cab with FS2(Dist2) too. Is there any way I can do this without Midi? Attached a drawing of my signal, thanks in advance! Quote Link to comment Share on other sites More sharing options...
datacommando Posted Wednesday at 01:13 PM Share Posted Wednesday at 01:13 PM On 1/22/2025 at 8:54 AM, ElPuni said: Is there any way I can do this without Midi? Hi, You might want to check this out - Command Centre allows you to assign almost anything to anything. Hope this helps/makes sense. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted Wednesday at 04:39 PM Share Posted Wednesday at 04:39 PM This is a job for Snapshots. SS1 - Clean - Both distortions and cab OFF SS2 - Dist1 - distortion1 ON; distortion2 OFF; cab ON SS3 - Dist2 - -distortion1 OFF; distortion 2 ON; cab ON In each Snapshot you just set the Blocks the way you want them and SAVE the Snapshot. The Crossover Split can simply be left as is. If you want the Chorus to remain ON or OFF regardless of Snapshot, select it, press ACTION>Page Right>Snapshot Bypass OFF. Quote Link to comment Share on other sites More sharing options...
ElPuni Posted Wednesday at 05:52 PM Author Share Posted Wednesday at 05:52 PM Thanks for the aswers, for the first one I´ve been trying to figure out how to activate a block from Command Center but I don´t get it, I only find how to send Midi to other devices or change only Presets, Snapshots or Looper (not blocks), but how can I activate the single Cab Block from there? And about SnapShots I already thought about it but I´d need another button (or SS) to activate/deactivate the Chorus so it won´t work, you´re missing the FS3-Chorus I guess if it´s possible at all. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted Wednesday at 07:18 PM Share Posted Wednesday at 07:18 PM Ever tried to hammer a nail with a screwdriver? Two options: Two button footswitch: https://www.amazon.com/Hotone-Momentary-Footswitch-Controller-Switcher/dp/B08H1NQCGJ/ref=sr_1_1?crid=J1TSNH05CUPL&dib=eyJ2IjoiMSJ9.BpeqSGJ7kcr-grI2JhSjcQEnQJslzIXLN2DwW57gNH6gJvoO2iqjDnTSnsmEW2PFVDC6IIuMnXiI8HjF8Om3ZB0oRKxLMKIOlMRu0gEp-L5Sw9qBimvkLPupQN5IZAhRJHyr8JgaGTv6s1XPiR1BahYBv6-jujeLzKyd-m43iK3h6p5ok6yJLyfljrfGvZ-DKTFFpsQcTLSwkrKXHD55a1QzozuNi_z96aEVGdj_HY2vyuUNMWBBvxuCjYFNKgyICYEHESfJif2B3Qyu8nJBTp8jby7XiYsn32TWzHmaScw1caSFZ9YoQp_uKD2mHIhaXSr7unoTydphOoS9FHY3svuyM6PTMAeSLsFMHdvzwTc.5dPkwBF-Sd1YodFGh863ZjLy7ARLnZRTZMGw_u6gBcM&dib_tag=se&keywords=footswitch&qid=1737572197&s=musical-instruments&sprefix=foot%2Cmi%2C147&sr=1-1 OR Trade your HXS for an HXSXL. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.