Cant save Exp 1 or 2 per snapshot

[berttango36]

I often use either exp pedal per snapshot to control different block’s bypass state/parameters. For example, I have a preset in which I use Exp 1 in Snapshot 1 for certain effects. Then, in Snapshot 3, I use Exp 2 to control a tremolo. Stadium XL is not saving them. 

[silverhead]

Have you checked the Discard Edits setting in the Snapshots Panel? Make sure it’s set to Off. If it’s On the changes you make in any Snapshot will be discarded when you go to a different Snapshot unless you save the preset first.

[jpdennis]

I had the same issue for some of my FX blocks and amp settings.  I discovered I had to make sure the slider for being enabled on snapshot for those FX blocks and amp settings were slide to the right to be controlled by snapshots.

[berttango36]

I have the discard edits on but make it a point to save prior to moving on. Have also checked that per snapshot setting is on. Still, lot of times its like Stadium will not retain the settings. As an example, set up a test preset. One volume at the beginning of the chain and one at the end. Snapshot 1 has the first one on and second off. Snapshot 2 vice versa. Every time I go to Snapshot 2, the volume at the beginning is on even though I have saved it to off. 

[silverhead]

Sounds like maybe a bug. Open a support ticket to report it.

[berttango36]

Ok, thanks for the help anyways 

[SagebrushWorship]

I'm having the same issue. I opened a ticket. Hoping to find a solution or maybe a patch update to fix this.