Tummeliten Posted May 26 Share Posted May 26 If I use the RJ45 Cable and a Bass Pod XT it works fine. With the Battery Pack there is no function at all. Maybe somebody can supply a schematic or knows this problem ? I need this to work , otherwise I cannot use my wireless .... Thanks in advance ! Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 26 Share Posted May 26 Line 6 Support page,... https://line6.com/technical-schematics/https://line6.com/technical-schematics/ Remember it is at your own risk. We know the abilities of our authorized service center as they go through a screening process. We don't know the abilities of everyone else. The 705 has a battery, and your wireless has a battery. If the wireless is not a Lie 6 product, it will not be easy to know how well they play together, both being active circuits. Good luck. Quote Link to comment Share on other sites More sharing options...
Tummeliten Posted May 27 Author Share Posted May 27 Hi, thank you for the quick answer. Link is doubled but i figured it out :-D Been there already and for the basses there is only a part list. No schematics. I could handle the repair easily but without it it is to look for a needle in a haystack. Wireless is not an issue once I have a signal from the 705. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 27 Share Posted May 27 No schematics for the basses, how odd. Might still be something sensitive there. I'll look into that. Quote Link to comment Share on other sites More sharing options...
Tummeliten Posted May 28 Author Share Posted May 28 Maybe that circuit is equivalent to the guitar 700 ? Would make sense. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 28 Share Posted May 28 No. Bass and guitar are much different. Quote Link to comment Share on other sites More sharing options...
Tummeliten Posted May 29 Author Share Posted May 29 yes I am sure , but not with the power supply part. But I do not have that much insight here. So maybe you can find out some details. Does it make sense to contact line6 / Yamaha directly and ask them for the appropriate schematics ? Thank You in advance ! Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 29 Share Posted May 29 The Line 6 Support Admin is the one who posts the schematics. I will let him know. Quote Link to comment Share on other sites More sharing options...
Tummeliten Posted June 8 Author Share Posted June 8 Hi again....any news ? Quote Link to comment Share on other sites More sharing options...
psarkissian Posted June 8 Share Posted June 8 Not yet. And I was out of office on Friday. I'll poke him again. By the way, Yamaha support in Japan would end up coming to us, so going through them wouldn't do it. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted June 8 Share Posted June 8 It seems that is what was released. Quote Link to comment Share on other sites More sharing options...
Tummeliten Posted June 9 Author Share Posted June 9 Which is kinda useless ....besides no parts are available anymore anyway .... Looks like my journey ends here ? Quote Link to comment Share on other sites More sharing options...
psarkissian Posted June 9 Share Posted June 9 Could be an issue with the battery pack, or a diode near where the header the battery pack connects to the processor board. Seen this when the current draw goes up due to a output load mis-match, or someone using rechargeable batteries on older tech like this. A Line 6 authorized service tech who has experience with the product could narrow it down for you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.