Midi switch control

[bigfishcatcher]

On the original Helix you could send midi messages to simulate pressing the switch ex CC50

 

can this be done on the stadium - I have had no luck figuring it out

 

I use it where I use stage traxx 4 to send the midi command to simulate a button press 

[bigfishcatcher]

and the button sends a midi to a separate device

I have set that up in stadium

but I can not get the stadium to forward the midi message to another device

I have programmed switch buttons to send the midi

but now I need to be able to send the midi to press the buttons

[silverhead]

Are the devices connected by midi cables or usb? Make sure your MIDI Global Settings and Command Center settings are correct.

[bigfishcatcher]

I have a Headrush vx5 vocal pedal

it can accept midi messages through USB but it does not allow you to enter a midi device number

I use the USB A on back of the Helix

and from my phone use USB C to the back of the HELIX

[bigfishcatcher]

global midi settings

 

midi over usb c  on

midi thru on

global midi channel 3

bypass midi channel 1

recieve midi pc  usb

send pc w preset  usb

duplicate send pc  off

send snapshot cc on

[bigfishcatcher]

so the Headrush vx5 is connected by usb and does not seem to get midi commands

 

so I connected up my older TC helicon voice live 3 and used the midi ports and it does get the commands