idexo Posted October 19, 2014 Share Posted October 19, 2014 I have hd500 also black top fender jaguar I use hd500 direct(via usb) with macbook pro retina>garageband today when I finally started to make my own tone I started with amps. clean and fat sound is great. then I tried distortions, noise gates, EQ, reverb etc... everything was fine. after a while I tried to turn off and turn on the distortion to see the difference but suddenly tone got ugly/muddy. I was just jamming on my own. Didn't touch anything else. Then I realized noise gate does this for a reason.did I fry something? this isn't normal right?Here's the video:http://www.youtube.com/watch?v=8Jt9tMo2EKQ Quote Link to comment Share on other sites More sharing options...
medievil1 Posted October 19, 2014 Share Posted October 19, 2014 move the noisegate.. put it immediately after the amps/mixer (But before any effects like reverb or delay)... makes a huge difference in tone and the gate still works for noise 1 Quote Link to comment Share on other sites More sharing options...
idexo Posted October 19, 2014 Author Share Posted October 19, 2014 move the noisegate.. put it immediately after the amps/mixer (But before any effects like reverb or delay)... makes a huge difference in tone and the gate still works for noise you're right. tyvm. it's all right now. it was my fault. problem solved. Quote Link to comment Share on other sites More sharing options...
DarthHollis Posted October 20, 2014 Share Posted October 20, 2014 The noise gate is a mono effect so it only sends a signal to path A. You would need 2 gates and have to put them after the split right in front of each amp or right after each amp. The way to do it above means that the path is being un-stereo'd after the amps. You created a stereo path but the gate combines those signals into a mono signal. That's Ok, if that's what you want. The POD HD series has a huge issue with the complexity of the routing scheme. Good luck. Quote Link to comment Share on other sites More sharing options...
DarthHollis Posted October 20, 2014 Share Posted October 20, 2014 Hurghanico, Thank you for pointing this out. Maybe I should have clarified because when I have used dual inputs I've had a major problem with this. If I have guitar/same as the inputs and I'm using a noise gate, I usually lose the amp in path B in a dual amp set up. Maybe I need to do my homework, but that's what I remember. Quote Link to comment Share on other sites More sharing options...
clay-man Posted October 20, 2014 Share Posted October 20, 2014 Just adjust the threshold. Quote Link to comment Share on other sites More sharing options...
gunpointmetal Posted October 20, 2014 Share Posted October 20, 2014 Just adjust the threshold. Thats about it...if you need it to pull down a little noise, after the amp works well, if you want tight, staccato metal rhythm gating, use the hard gate in front of any gain effects. Quote Link to comment Share on other sites More sharing options...
clay-man Posted October 20, 2014 Share Posted October 20, 2014 Sorry I just watched your video now. I think your input is way too high and the noise gate module doesn't have a friendly volume ceiling. I assumed you meant the noise gate was sucking the tone. You have to turn down your volume input, it's way too hot. Try using the Guitar Pad. Go here and vote this up to try to get Line 6 to fix clipping issues on FX! http://line6.ideascale.com/a/dtd/Fix-all-clipping-problems-with-the-HD500/667826-23508 Quote Link to comment Share on other sites More sharing options...
idexo Posted October 27, 2014 Author Share Posted October 27, 2014 The guide at this link helped me solve my problems with HD500: http://foobazaar.com/podhd/toneGuide/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.