Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Spider IV (75-150 HD) Factory Reset, Presets and F.A.Q.s


Line6Tony
 Share

Deutsch
Français

 


Q: Where can I find videos on how to use the Spider IV amplifier?
Spider IV movies

 

Q: Where can I download the Spider IV Pilot's Guide and Advanced Guide?
Spider IV Advanced Guide
Spider IV Pilot's Guide

 

Q: What are the presets on my Spider IV amplifier?
A: The user presets and artist/song presets for the Spider IV can be seen at Spider IV presets.xlsx. There are the 64 user-programmable presets, over 350 Artist Presets, and over 200 song and effect-based presets. Be aware that the artist, song, and effect based presets cannot be saved in their current location, but you can modify and/or store these setting in one of the 64 user-programmable presets. If you would like to return your unit to the original presets, please perform a factory reset.


Q: How are the preset banks categorized?
A: The User, Artist, and Song Banks can be navigated by using the left/right buttons on the four-way selector. You can navigate through the banks once you are in the specific area using the up/down buttons on the four-way selector, then once you are in the specific bank you can access the individual presets by turning the presets encoder key.

 

Q: How do I perform a factory Reset on the Spider IV series amplifiers?
A: Hold the A button as you power the unit on, then press the presets encoder once.

 

***NOTE: If an FBV controller is connected to the Spider IV during the Factory Reset, the LCD screen on the FBV will go blank. To return the display, simply press a footswitch on the FBV or disconnect/reconnect the CAT5 cable to the FBV.

 

Q: Where are the "bonus" presets that are not programmed into the amp?
Spider IV 75, 120, 150 and HD150 - Song Settings

 

Q: Is there an editor for the Spider IV (75, 120, 150, 150 HD) series amplifier?
A: Yes, see the following link for details:
Spider IV Edit v1.02 FAQ

 

Q: What are the amp models on the Spider IV 75/120/150/150HD?*

 

Clean Red - Based on the clean channel of the Marshall® JCM 900, the first true modern high gain amp from Marshall. Select Clean Red to get crisp, amazing clean tones, great warm jazz tones, and all the high-end shimmer you'll need with a generous amount of bottom end.

 

Clean Green - We developed this amp model to emulate those late 60s and early 70s clean tones. We modeled a 1973 Hiwatt® custom 100, then extended the tone control range and tightened up the low end for that big, ringing sound.

 

Twang Red - This amp model draws on our analysis of mid 60s Fender® amps, in particular the blackface '65 Twin Reverb®. We wanted that classic, glassy high end tone, with enough snap and bite for some serious chick'n pick'n. Things don't get too crunchy until you reach the top range of the Drive knob.

 

Twang Green - There's nothing like the sound of the classic Fender® blackface Deluxe Reverb®, the Holy Grail for many blues, country and roots rockers.

 

Class A Red - Ready, steady....GO! This amp model is based on a Vox® AC-30 amplifier with an updated and expanded TBX tone control circuit. We wanted to capture that early pop rock tone that many British invasion bands are so well known for.

 

Class A Green - There are some great modern amps out today based on the legendary tones of yesteryear. Here's our take on the EL84 circuit of a Divided By 13 9/15 Model.

 

Blues Red - This amp model is inspired by that famous vintage tweed sound we all know and love. We evaluated a '53 Fender® wide panel Deluxe and this is what we came up with.

 

Blues Green - Blues Green is based on a Gretsch® 6156, a 1960 1x10 combo from the days when rock 'n' roll took the blues to a new level. Add some reverb and a slap echo and be-bop-alu-la!

 

Crunch Red - This sound was crafted during our studies of the '68 Marshall® Plexi 50 Watt, which was used by a number of early metal bands. Hi Gain Red provides a wider range of tone control settings than the original jumpered Marshall®, allowing you to bump up the mids even at the highest Drive settings.

 

Crunch Green - Here's our inspired interpretation on a 2005 Orange® AD-30TC, a 30 watt, Class A head that oozes pure Brit rock tone, taking 60s crunch to a new level.

 

Hi Gain Red - Plexi On Fire! This amp model is based on a '68 Marshall® Plexi 100 watt with a few added extras; the combination of a Variac and the jumpered input channels creates that infamous brown sound that will feel like flames are shooting out the input jack!

 

Hi Gain Green - Hi Gain Green was inspired by the Diezel® Herbert, the 180 watt Ducati of high performance guitar amplifiers, featuring a huge, tight low end.

 

Metal Red - For this amp model we took the classic Mesa/Boogie® Dual Rectifier® and added a few enhancements. The resulting Amp Model has a definite modern flavor. This monster truck of tone delivers a bottom end that's big, powerful, tight and fast. Use Metal Red to get a punchy, high gain Metal sound.

 

Metal Green - This sound was created to be an aggressive high gain Amp Model with a unique Mid control that will sweep though an entire spectrum of tone on one knob. With the Mid knob is set to minimum, the distortion exhibits Fuzz pedal characteristics. When set to noon, it mimics the creamy modern high gain amp tones. And when turned up to max, its reminiscent of that maxed out Class A sound. Of course there are all the places in-between...

 

Insane Red - This model is our "dialed in for shredding" version of the Mesa/Boogie® Dual Rectifier® red channel. It combines the intensity and impact of Metal Red, but delivers more midrange and teeth for that bone-crushing, brain piercing insane grind.

 

Insane Green - Our goal with Insane was to provide you with as much input gain distortion as possible short of complete meltdown. You get an obscene helping of distortion, while still retaining tonal definition and character. As a result, you get way more bottom end and cabinet character than other small amps. Crank up the Drive control and prepare to dominate!

 

*All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These product names and descriptions are provided for the sole purpose of identifying the specific products that were studied during Line 6's sound model development. HIWATT® is a registered trademark of Fernandes Company, Ltd. FENDER®, TWIN REVERB® and DELUXE REVERB® are registered trademarks of Fender Musical Instruments Corporation. VOX® is a registered trademark of Vox R&D Limited. MARSHALL® is a registered trademark of Marshall Amplification Plc. GRETSCH® is a regustered trademark of Fred W. Gretsch Enterprises, Ltd.ORANGE® is a registered trademark of Orange Personal Communications Services Ltd. MARSHALL® is a registered trademark of Marshall Amplification Plc. MESA/BOOGIE® and RECTIFIER® are registered trademarks of Mesa/Boogie, Ltd. DEIZEL is a regiustered trademark of Deizel GMBH.

 

Q: What is 'Manual Mode'?
A: When the Manual button is lit, Spider IV is operating in 'Manual Mode', meaning that all of the controls are active and the sound of the amp is determined by the current knob settings. If you are not in Manual Mode and would like to be, simply press the 'manual' button. You can exit manual mode by selecting the 'manual' button again, or pressing the buttons for A-D.

 

Q: What are the specifics of the Smart Harmony effect on the Spider IV (75-150) Series?
A: The Smart Harmony can be placed 'pre' or 'post' amp, and can perform diatonic harmony for any root note (A through G#) from a unison (no change) to a ninth interval (up to seven steps) above or below the root note. The scales included in the Smart Harmony include Major, Natural Minor, Pentatonic Major, Pentatonic Minor, Harmonic Minor, Melodic Minor, Whole tone, and Diminished scale. The overall mix of the Smart Harmony effect can be programmed and stored per patch from 0-100%.

 

Q: What are the specifics of the Pitch Glide effect on the Spider IV (75-150) Series?
A: The Pitch Glide can be placed pre' or 'post' amp, and the Heel and Toe positions of the FBV can be programmed two octaves above or below the incoming note in ½ steps (semi-tones) increments. Be aware that the number '7' in this situation equals 3.5 steps (because of the half step measurements) rather than an interval of a seventh (5.5 steps) that would be heard when using the Smart Harmony effect. The overall mix of the Pitch Glide effect can be programmed and stored per patch from 0-100%.

 

Q: Where can I learn more about using the Smart Harmony and Pitch Glide features?

 

Q: I already have an original FBV controller, will this work on the Spider IV 75-150 series?
A: The FBV (Mk I) controllers will control most of the standard functions on the Spider IV 75-150 series with a few limitations. Here is a breakdown of the limitations:

 

FBV Express
1. The FBV Express (Mk I) cannot punch in and out overdubs. It just starts record once for a single pass. The FBV Express Mk II can control the overdub feature.
2. The FBV Express (Mk I) cannot arm the Quick Loop. The quick loop must be armed by pressing the amp front panel. The FBV Express MkII can arm the Quick Loop by pressing down either the A+B or C+D footswitches. This is what takes you out of Looper mode as well.

 

FBV Shortboard
The FBV Shortboard (Mk I) cannot arm the Quick Loop. The quick loop must be armed by pressing the Quick Loop button on the front panel. The FBV Shortboard MkII can arm the Quick Loop by pressing the (new) Function 2 button. Overdubbing works on both original and current Shortboards.

 

All other functions are available on the FBV Mk I pedals as their Mk II counterparts. Due to the new effects layout, the FBV Shortboard FX Loop button will activate the Boost setting in the Spider IV 75-150. On the FBV Shortboard Mk II this button is labeled 'Function 1'.

 

Q: What are the specifics on the Looper function of the Spider IV (75-150) Series?
A: The Spider IV (75 and above) has a 14 second looper on the amplifier that can be activated by the face of the unit or the FBV Mk II series controllers. See the following video for more looper information:

 

Q: How do I connect the Spider IV 150/HD to the Spider Cabinet?
A: The Spider IV 150 and HD is designed to see a load on *both * speaker outputs by connecting the left and the right inputs to the Spider cabinet with speaker cables. Running the Spider IV 150/ HD into a 4 ohm load may result in damage to the amplifier. Please see the following link for more information:

 

Cabinet Connection and Ohm F.A.Q

 

Q: Can I use two Spider cabinets with the Spider Series HD 150?
A: The Spider IV 150 and HD were designed to power a single Spider Stereo Cabinet with a stereo 8 ohm load. Using two Spider cabinets would require a modification to each cab so that they are each rewired to produce a 16 ohm mono load. This modification would preferably be done by an authorized Line 6 service center, which can be located from the Service Center link on the Support page.

 

Q: How do I connect external speakers to my Spider IV 150 amplifier?
A: Line 6 recommends disconnecting the internal speakers (covering the dry-solder clips with electrical tape) and connecting both external speaker outputs to an 8 ohm (or 16 ohm) load. Do not connect just one side, as this may cause a power amp failure. Powering the internal speakers along with a external speakers may cause a power amp failure and is not supported.

 

Q: What type of speaker is used on the Spider IV series?
Spider IV 15: Custom 15 (4 ohm)
Spider IV 30: Celestion G12E50 (4 ohm)
Spider 1V 75/150: Celestion G12P80 (8 ohm)
Spider IV 120: (2) Celestion G10P80 (8 ohm)

 

Q: Where can I get a cover or replacement knobs for my Spider IV amplifier?
A: Line 6 Store

 


Wo kann ich Videos zur Nutzung des Spider IV Verstärkers finden?
Spider IV movies

 

Wo kann ich Benutzerhandbücher herunterladen?
Spider IV Advanced Guide
Spider IV Pilot's Guide

 

Welche Presets kann ich auf dem Spider IV finden?
All User, Artist und Song Presets können Sie hier finden: Spider IV presets.xlsx

 

Insgesamt sind 64 selbsteinstellbare Presets, über 350 Artistenpresets sowie über 200 Song- und Effektpresets enthalten. Die Artist, Song und Effekt Presets können nur verändert und abgespeichert werden indem Sie sie in eine der 64 User Banken abspeichern und dann von dort aus editieren. Wenn Sie das Gerät zurück auf die Originalpresets zurückstellen wollen, dann müssen Sie das Gerät auf Werkseinstellungen zurücksetzen.

 

Gibt es verschiedene Kategorien für die Presets?
Die Presets sind in User, Artist und Song Presets eingeteilt. Nutzen Sie zur Auswahl einfach die rechts-links Pfeiltasten. Sobald Sie dann in einer der Abteilungen sind, können Sie die Bank anhand der rauf-runter Pfeile auswählen und hier können Sie dann die verschiedenen Presets mit dem Preset Knopf ansteuern.

 

Wie kann ich das Gerät auf Werkseinstellungen zurücksetzen?
Halten Sie dazu den A Knopf beim Starten des Gerätes gedrückt und drücken Sie den Presets Knopf einmal.

 

Achtung, wenn ein FBV Controller während des Zurücksetzens angeschlossen ist, dann wir der Bildschirm sich leeren. Um wieder ein Bild zu bekommen brauchen Sie nur einen Fußschalter zu drücken oder das CAT5 Kabel neu einzustecken.

 

Wo sind die Bonus Presets, die einprogrammiert sind?
Spider IV 75, 120, 150 and HD150 - Song Settings

 

Gibt es einen Editor für die Spider IV 75, 120, 150 und 150HD Verstärker?
Ja: Spider IV Edit v1.02 FAQ

 

Welche Verstärkermodelle gibt es auf dem Spider IV?
Clean Red: Auf Basis des Clean Kanals eines Marshall® JCM 900, der erste moderne High Gain Verstärker von Marshall. Wählen Sie Clean Red für knackigen, klaren Sound und warme Jazz Töne. Zusätzlich bietet das Modell Viel Bass.

 

Clean Green: Dieses Modell wurde dazu entworfen nach den sauberen 60er und 70er Tönen zu klingen. Wir haben dazu einen Hiwatt® custom 100 als Vorlage verwendet und die Tonreichweite modifiziert für einen tollen klingelnden Sound.

 

Twang Red: Dieses Modell ist das Resultat unserer Analyse von Fender® Verstärkern der 60er Jahre, ganz besonders des 65er Blackface Twin Reverb®. Unser Ziel war ein klassisch glasiger Ton, der aber nicht zu krass nach oben hin klingen soll, wenn man Drive aufdreht.

 

Twang Green: Auf basis des einzigartigen Fender® Blackface Deluxe Reverb®.

 

Class A Red: Auf Basis eines Vox® AC-30 mit modifizierter TBX Kontrolleinheit für tollen englischen Pop Rock Sound.

 

Class A Green: Es gibt viele modern Verstärker, die auf Tönen von alten Verstärkern basieren. Hier ist unser Modell nach einem EL84 Schaltkreis eines Divided By 13 9/15.

 

Blues Red: Auf Basis eines 53er Fender® Deluxe.

 

Blues Green: Auf Basis eines Gretsch® 6156, eine 1x10 Combo von 1960.

 

Crunch Red: Auf Basis eines 68er Marshall® Plexi 50 Watt. Crunch Red hat mehr Ton Kontrolle als der original Marshall Verstärker sodass Sie die Mitten auch bei hohen Drive Einstellungen noch aufdrehen können.

 

Crunch Green: Unsere Interpretation eines 2005er Orange AD-30TC 30Watt. Purer englischer Rock Sound der Klasse A.

 

Hi Gain Red: Auf Basis des 68er Marshall Plexi 100Watt mit ein paar kleineren Extras. Für den berüchtigten „Brown Sound“.

 

Hi Gain Green: Auf Basis eines Diezel® Herbert, ein 180Watt Verstärker mit ungleublicher Performance.

 

Metal Red: Für dieses Modell haben wir den Sound eines Mesa/Boogie® Dual Rectifiers® modelliert und leicht verändert für einen etwas moderneren Ton. Nutzen Sie Metal Red für druckvollen High Gain Sound.

 

Metal Green: Ein aggressives High Gain Modell mit einzigartiger Kontrolle über die Mitten. Auf dem Minimum können Sie Fuzz Karakteristiken erzeugen, auf 12 Uhr bekommen Sie einen modernen High Gain Sound und voll aufgedreht bekommen Sie einen Class A Sound und dann gibt es natürlich noch alles dazwischen.

 

Insane Red: Unsere Shredding Version des roten Kanals eines Mesa/Boogie® Dual Rectifiers®. Eine Kombination von Metal Red mit mehr Mitten.

 

Insane Green: Dieses Modell soll so viel Input Gain wie nur möglich liefern mit extremer Verzerrung. Das Modell behält bei der abgefahrenen Verzerrung aber immernoch die Definition und den Charakter. Mehr Bassbox Karakter als die meisten kleineren Verstärker liefern können.

 

*Alle in diesem Dokument erwähnten Produktnamen sind Marken der jeweiligen Besitzer, welche weder zu Line 6 gehören noch mit Line 6 assoziiert sind. Die vorher genannten Marken werden in diesem Dokument nur zur Identifikation der Produkte verwendet, deren Sounds und Klänge Line 6 studiert hat während des Sounddesigns der verschiedenen genannten Line 6 Modelle. HIWATT® ist ein eingetragenes Warenzeichen von Fernandes Company, Ltd. FENDER® TWIN REVERB® und DELUXE REVERB® sind eingetragene Warenzeichen von Fender Musical Instruments Corporation. VOX® ist ein eingetragenes Warenzeichen von Vox R&D Limited. MARSHALL® ist ein eingetragenes Warenzeichen von Marshall Amplification Plc. GRETSCH® ist ein eingetragenes Warenzeichen von Fred W. Gretsch Enterprises, Ltd. ORANGE® ist ein eingetragenes Warenzeichen von Orange Personal Communication Services, Ltd. MESA/BOOGIE® und RECTIFIER® sind eingetragene Warenzeichen von Mesa/Boogie, Ltf. DIEZEL® ist ein eingetragenes Warenzeichen von DIEZEL GmbH.

 

Was ist der „Manual Mode“?
Wenn der Manual Mode Knopf leuchtet, dann ist der Manual Mode eingeschaltet, der Ihnen volle Knotrolle über den Verstärker verleiht. Alle Einstellungen sind also aktiv und der Ton des Verstärkers hängt vollkommen von den Einstellungen der Knöpfe ab. Drücken Sie einfach den „Manual“ Knopf um den Manual Mode ein- und auszuschalten.

 

Was sind die Spezifikationen des Smart Harmony Effektes auf den Spider IV 75-150 Verstärkern?
Der Smart Harmony Effekt kann auf Pre oder Post gestellt werden und liefert eine diatonische Harmonie für alle Grundtöne vom Einklang zum neunten Intervall über oder unter der Grundnote. Enthalten sind Major, Naural Major, Pentatonisches Major, Pentatonisches Moll, harmonisches Moll, melodisches Moll, voller Ton sowie eine verminderte Skalierung. Der Mix das Effektes kann von 0 bis 100% eingestellt und einzeln auf Patches abgespeichert werden.

 

Was sind die Spezifikationen des Pitch Glide Effektes auf den Spider IV 75-150 Verstärkern?
Der Pitch Glide Effekt kann auf Pre oder Post gestellt werden und die zwei Pedal Stellungen des FBV können auf 2 Oktaven rauf und runter in Halbschritten programmiert werden. 7 bedeutet in diesem Fall also 3,5 Schritte anstelle eines siebtel Intervalls, wie man es sich eigentlich vorstellen könnte. Der Mix das Effektes kann von 0 bis 100% eingestellt und einzeln auf Patches abgespeichert werden.

 

Wo kann ich mehr über Smart Harmony und Pitch Glide lernen?

 

Ich habe bereits einen original MkI FBV Controller, funktioniert dieser mit dem Spider IV 75-150?
Die meisten Hauptfunktionen sind auf den MkI Boards belegt mit ein paar wenigen Ausnahmen:

 

FBV Express:

  • Es kann keine Overdubs benutzen, es fängt einfach an aufznehmen. Dieses Problem besteht nicht bei dem MkII.
  • Der Quick Loop funktioniert nur bedingt, Sie müssen Ihn am Frontpanel des Verstärkers starten. Beim MkII kann Quick Loop ganz einfach durch den Druck der Fußschalter A+D oder C+D gestartet werden.


FBV Shortboard:

  • Der Quick Loop funktioniert nur bedingt, Sie müssen Ihn am Frontpanel des Verstärkers starten. Beim MkII kann Quick Loop ganz einfach durch den Druck des Function 2 Knopfes gestartet werden. Overdubbing funktionert auf MkI sowie MkII.
  • Alle anderen Funktionen sind auf dem MkI (dem originalen Shortboard) funktionstüchtig. Aufgrund des neuen Layouts jedoch, aktiviert der FX Loop knopf am alten Shortboard die Boost Einstellung und am neuen (MkII) heißt dieser Knopf „Function 1“.


Was sind die Spezifikationen der Looper Funktion auf den Spider IV 75-150 Verstärkern?
Der Spider IV (75 oder höher) hat eine 14 Sekunden Looper Funktion eingebaut die vorne auf dem Verstärker aktiviert werden kann.

 

 

 

Wie kann ich mein Spider IV 150/HD an ein Spider Cab anschließen?
Die Spider IV 150 und 150 HD sind dazu entworfen eine Last auf beiden Lautsprecherausgängen zu haben. Schließen Sie also bitte beide Ausgänge an die Box anhand von Lautsprecherkabeln an. Den Verstärker an eine 4 Ohm Last anzuschließen kann den Verstärker beschädigen:

 

Cabinet Connection and Ohm F.A.Q

 

Kann ich zwei Spider Boxen an den Spider 150 HD Verstärker anschließen?
Der Verstärker ist dazu entworfen eine einzige Box angeschlossen zu haben mit stereo 8 Ohm Last. Um 2 Boxen anzuschließen, müssten beide Boxen modifiziert werden um 16 Ohm Mono zu erzeugen. Die Modifikation kann bei einem Line 6 Service Center durchgeführt werden.

 

Wie kann ich externe Lautsprecher an den Spider IV 150 anschließen?
Wir empfehlen die inneren Lautsprecher vom Verstärker zu trennen und beide externe Lautsprecher Ausgänge an 8 oder 16 Ohm anzuschließen. Aber schließen Sie immer beide Seiten an, nicht nur eine einzelne denn dies kann zu Endstufenproblemen führen. Die internen zusammen mit externen Lautsprechern anzuschließen kann auch zu Fehlern in der Endstufe führen und ist nicht unterstützt.

 

Welche Lautsprecher werden in die Spider Verstärker eingebaut?
Spider IV 15: Custom 15 (4Ohm)
Spider IV 30: Celestion G12E50 (4Ohm)
Spider IV 75/150: Celeston G12P80 (8Ohm)
Spider IV120: 2x Celestion G10P80 (8Ohm)

 

Wo kann ich Ersatzteile oder in Schutzhülle für mein Spider IV kaufen?

 

Line 6 Store

 


Ou puis-je trouver des vidéos sur l’utilisation du Spider IV?
Spider IV movies (Attention, les vidéos sont en anglais.)

 

Ou puis-je télécharger le mode d’emploi du Spider IV ?
Spider IV Advanced Guide
Spider IV Pilot's Guide

 

Quels sont les presets sur l’ampli Spider IV?
Trouvez tous les presets User et Artist/Song ici : Spider IV presets.xlsx . Le Spider IV a 64 presets User, plus que 350 presets Artiste et 200 presets Song et sur base d’effets. Les presets Artist, Song et sur base d’effets ne peuvent pas être enregistrés dans la position courante mais vous pouvez les modifier ou enregistrer dans une des banques User. Si vous voulez retourner votre appareil à cause d’une erreur ou un problème.

 

Comment est-ce qu’on classe les presets en catégories ?
Vous pouvez naviguer entre presets User, Artiste et Song avec les boutons gauches et droite. Si vous êtes dans une banque, vous pouvez naviguer pour chercher

 

Comment puis-je réinitialiser l’appareil ?
Maintenez enfoncé le bouton A en allumant l’appareil. Après ca, poussez le bouton Presets.

 

Attention, si un contrôleur FBV est connecté au Spider IV pendant la réinitialisation, l’écran du FBV se vide. Poussez un des commutateurs aux pieds ou reconnectez le câble CAT5 pour réactiver l’écran.

 

Ou puis-je trouver les presets « bonus » pas programmé dans l’ampli ?
Spider IV 75, 120, 150 and HD150 - Song Settings

 

Y a t il un éditeur pour les Spider IV ?
Spider IV Edit v1.02 FAQ

 

Quels sont les modèles d’ampli sur les Spider IV ?
Clean Red: Basé sur le canal clean du Marshall® JCM 900 le premier amplificateur moderne à gain élevé. Sélectez Clean Red pour un son clair, un ton jazz chaud et beaucoup du basse.

 

Clean Green: Ce modèle était développé pour les sons clairs des amplis des années 60 et 70. Ce modèle est basé sur un Hiwatt® 1973 custom 100.

 

Twang Red: Ce modèle est le résultat de nos analyses des amplis Fender® des années 60. En particulier, le Le 65 Blackface Twin Reverb®. On a essayé d’imiter ce son classique, de gain élevé. Le son ne devient pas trop crunchy jusqu’à ce que vous tourniez au bouton Drive.

 

Twang Green: Basé sur le Fender® Blackface Deluxe Reverb®.

 

Class A Red: Basé sur un Vox® AC-30 avec circuit de contrôle TBX modifié. On a essayé d’enregistrer le on pop rock des groupes anglaises.

 

Class A Green: Basé sur le circuit EL84 d’un Divided By 13 9/15.

 

Blues Red: Basé sur un Fender® Deluxe de 1953.

 

Blues Green: Basé sur un Gretsch® 6156, un combo de 1960 1x10.

 

Crunch Red: Basé sur un Marshall® Plexi 50 Watt de 1968.

 

Crunch Green: Basé sur un Orange® AD-30TC de 2005. 30Watt classe A.

 

Hi Gain Red: Basé sur un Marshall® Plexi 100 Watt de 1968 avec des extras.

 

Hi Gain Green: Basé sur un Diezel® Herbert 180 Watt.

 

Metal Red: Basé sur un Mesa/Boogie® Dual Rectifier® amélioré. Le modèle est un peu moderne.

 

Metal Green: Un modèle de gain élevé très agressive avec un contrôle des mis spéciale. Le bouton des mis sur le minimum et vous recevez des distorsions comme un pédale Fuzz. Sur le maximum, c’est un son comme un ampli Classe A.

 

Insane Red: Basé sur un Mesa/Boogie® Dual Rectifier® avec plus de mis.

 

Insane Green: Le maximum de distorsion d’entrée possible.

 

*Tous les noms de produits dans ce document sont des marques déposées des propriétaires respectifs. Ces noms de produits ne sont pas affiliés ou associés avec Line 6, ils sont uniquement utilisés pour identifier les produits de ces fabricants. HIWATT® est une marque déposée de Fernandes Company, Ltd. FENDER®, TWIN REVERB® et DULXE REVERB® sont des marques déposées de Fender Musical Instruments Corporation. VOX® est une marque déposée de Vox R&D Limited. MARSHALL® est une marque déposée de Marshall Amplification Plc. GRETSCH® est une marque déposée de Fred W. Gretsch Enterprises, Ltd. ORANGE® est une marque déposée de Orange Personal Communications Services Ltd. MESA/BOOGIE® et RECTIFIER® sont des marques déposées de Mesa/Boogie, Ltd. DIEZEL® est une marque déposée de Diezel GmbH.

 

Qu'est-ce que le « Manual Mode » ?
En mode manuel, tous les contrôles sur le Spider IV sont activés et le son de l’ampli est déterminé par les postions des boutons. Poussez le bouton Manual pour entrer le mode manuel. Poussez le bouton encore une fois pour désactiver ce mode.

 

Quels sont les spécifications pour l’effet Smart Harmony sur un Spider IV ?
Vous pouvez le mettre en Pre ou en Post et peut faire une harmonie diatonique pour tous les notes de base d’un unisson à au 9ième intervalle (c’est jusqu’à 7 étapes) dessous ou dessus de la note originale. Inclus sont : Majeur, Mineure naturelle, Pentatonique majeur, Pentatonique mineur, Mineure harmonique, Mineure mélodique, Ton entier, et échelle réduite. Le mix peut être programmé et enregistré par patch de 0 à 100%.

 

Quels sont les spécifications pour l’effet Pitch Glide sur un Spider IV ?
Vous pouvez le mettre en Pre ou en Post et les deux positions du contrôleur FBV peuvent être programmées pour deux octaves dessus ou dessous la note d’entrée en incréments de ½. 7 veut dire que ce sont 3,5 étapes. Vous pouvez aussi programmer le Mix de l’effet et l’enregistrer entre 0 et 100% par patch.

 

Ou puis-je apprendre plus sur ces deux effets ?

 

J’ai déjà un contrôleur FBV original, est-ce qu’il fonctionne avec le Spider IV?

 

Oui, mais avec quelques limitations :
FBV Express :

  • Vous ne pouvez pas configurer les overdubs. Il simplement enregistre une fois.
  • Vous ne pouvez pas utiliser Quick Loop. Lancez-le avec le panneau de l’ampli.


FBV Shortboard :

  • Vous ne pouvez pas utiliser Quick Loop. Lancez-le avec le bouton Quick Loop.


Quels sont les spécifications pour la fonction Looper sur les Spider IV ?
Les Spider IV 75 et ci-dessus on un looper de 14 secondes.

 

 

 

Comment puis-je connecter le Spider IV 150/HD à un baffle Spider ?
Vous devez toujours connecter les deux sorties gauche et droit au baffle avec des câbles d’haut parleurs. La connexion du Spider IV à une 4 Ohm Impédance peut endommager l’ampli :

 

Cabinet Connection and Ohm F.A.Q

 

Puis-je utiliser deux baffles avec le Spider HD 150?
L’ampli doit être modifié pour faire fonctionner deux baffles avec un ampli. Un Line 6 Centre Service peut faire cette modification.

 

Comment puis-je connecter des haut-parleurs externes à mon ampli Spider IV 150 ?
Déconnectez les haut-parleurs internes et connectez les deux sorties haut parleurs à 8 ou 16 Ohm. Ne connectez pas seulement une côté. Ne connectez pas des haut-parleurs externes ET les internes en même temps, ce peut endommager l’ampli.

 

Quels haut-parleurs sont utilisés dans les amplis Spider IV ?
Spider IV 15: Custom 15 (4Ohm)
Spider IV 30: Celestion G12E50 (4Ohm)
Spider IV 75/150: Celestion G12P80 (8Ohm)
Spider IV 120: 2x Celestion G10P80 (8Ohm)

 

Ou puis-je acheter des remplacements ou une couverture pour men ampli?

 

Line 6 Store

 

 Share



×
×
  • Create New...