nickrobinson

That seems to have solved the problem. Many thanks. the HX is a superb and flexible unit and I couldn't live without it.

I understand about assigning the pedals, I've used this for 8+ years. But this issue s recent. if the exp/amp option is stored per patch, it should return to exp if changed on another patch? Once exp2 has stopped responding, only a reboot will restore it.

Resetting seems to cure the problem, but as soon as I restore from my backup, it's back again, so presumably it's something within the patch. I thought exp2 config was global - is there some setting per patch/bank?

I have 2 expression pedal, both of which work, until I change a patch. exp2 then stops working until I reboot the HX. It has to be a firmware issue, since if I swap the pedals, they both continue to work on exp1 ;( Are there any bank-specific settings? I'm assuming the pedal 2 assignment of exp/amp are global... Resetting seems to cure the problem, but as soon as I restore from my backup, it's back again. It's seriously frustrating!

I've requested this, no joy so far. It's infuriating live, so I've added an external mute switch to engage whist deleting - the HX doesn't have enough blocks for me to add this as an internal switch. Any easy fix to use midi, long overdue!

fantastic tip - works for me & saves sending CC message to control my Katana volume ;)

I've written a page about the looping functions http://looping.me.uk/hx-effects-looper-features/

Fantastic, you've saved me some stress that way, although it *is* annoying if you're emptying the loop between songs and people hear that burst (guess I could mute whilst doing that, ) I'd still like to see a dedicated "stop" on the 6 sw - have it as an alternate option for the "play once" button, since I can't think of many who use that? I like to snag a loop during a verse, then stop it immediately for alter use and the double tap requires serious concentration to end the loop in perfect time then stop it almost immediately afterwards, but I guess I'll pick up the skill.

my m9 looper is fed through the FX regardless of the setting of pre/post - any ideas?

Doh - you have to be in looper mode then just toggle switch 3B. Can't think how I missed this. Thanks for your help!

> place the looper at the beginning of your signal chain That sounds right, but I cannot find how to do this, after searching high & low on google ;(

Is it possible to route the looper through the effects so that when the looper is switched off, the reverb (for example) would apply to the loop?

I'd love to know if there will be further firmware updates, things like amp modelling, routing the loop to a different jack etc. It's a superb product but I'd hate to think it's at the end of it's development cycle ;(