guilhordas

after 6 years using direct pod to the mixer, every weekend, I learned to relax, I learned that in each PA the pod behaves differently, and found that to get a good tone from the pod is necessary an quality PA ,when I started using I almost went crazy. in every show I changed all the parameters of the pod, but it's not how you do it depends on the PA there are days that my sound is beautiful and there are days it is horrible, one lesson I learned is that the pod has excess bass, especially in marshall models, which are the ones that use, On PA, it is very evident, work with little bass and little gain so is the pod, there is not much to do

thanks

very nice tone, but i think that vox(default parameters) direct to the pa sounds very different, at leats for me

for me the best clean on pod is tweed b man brt with 4x12 highway and 421 dynamic, i think ac vox 30 very thin with the standard parameter

changing the cab, use a marshakll 4x12

I run my pod hd 500 in Looping my jvm marshall, I do not use any amp and drive from pod ,just use for modulations, noise gate, tuner and delays. Do you think that in this case, should I use the 4 cable method or just run my pod in jvm the loop? as I've been doing already

thanks peter

hi, very cool, as always, but the advantage of this system 4 cables would not connect to a tube amp? which advantage of making this method in a transistor amp, it would not be even better, in this case, direct connect the mixer?

hi peter, you have the habit of running the pod direct to the mixer in live gigs? would be very interesting to hear your many great patches in this kind of situation

there was some update to jtb released these days?

I did the update and it happened all ok, I changed some parameters of global eq and now want to go back to the original parameters, anyone know the original values of each frequency?

on my clean patches I prefer more using the mixer block to increase volume than compressor /limiter, I think its sounds much more natural. And, instead using volume pedal I like set Studio eq on expression pedal, just using the gain of the Eq.

I was very excited manly with the peter jcm patches because when I tried the first time it was on a Great PA and souded very good, but after that, I did several gigs in pa not so good conclusion, the jcm manly sounded very bad, conclusion: run the direct pod in the mixer depends almost 100% quality of pa, but not necessarily just the soundman, because sometimes the band is sounding very, very good, drums ,keaybords and bass but not the guitar. because guitar sound depends on many factors, many frequencies and tones.

is this plexi with tube screamer on right? just the fact that you have got this great sound from useless jcm 800 you are already a genius, ahahaha

THE fender patch and jtm are lower than the others

it is obvious that you will need to try the patches of Peter on a good PA, PA well equalized, if not this is so, nor even peter ´s patches will sound good, today I try a pa on anot so good and sounded different

me too , hated and ignored jcm 800, I thought this jcm 800 garbage and completely useless, but after peter everything changed ahahaha . this afternoon I had the opportunity to try all his patches in soundcheck in a venue that I will play tonight, great PA and playing too loud, they sounded really good, even garbage jcm 800 aahahh, and treadplate that I could never be satisfied on pa now got. Thanks peter

hi peter very nice , Im looking forward for this new videos and patches

youre talking about the hd workbench right?

do you use pod hd 500? strange, loved their tones, but quand dowloaded their patches and put in my pod hd 500 x, they sounded completely different,what kind of pod you use, because your patches are not to pod hd 500, right?

last questiom, you think is better run a rc2 boss loop on fx loop or after pod , on 1/4 out? thank you very much

Should I mute the chanel b or is not necessary?place the pans to the right and to the left side is going to turn down the volume a bit, this is normal right?

open the pan is to put pans to the righ or left side, in my case i use in the center boths channels of mixer my chain is mono , i dont use 2 patchs , just one patch,what do you mean pre position? Im asking what i shoul do to have the more clean sound, without any distorcion .and whithout doubling the signal sorry my english

My question is, as I use the mono pod, Irun only one XLR or 1/4 of the pod out, should I mute the b channe in mixerl or open the pan completely ?

if i understood well , it is better if i open tottaly the pans or mute the b chanel on mixer?