Berry_B
-
Posts
15 -
Joined
-
Last visited
Everything posted by Berry_B
-
Went to a Metro24 board. Same power, just went to some slimmer EBS patch cables. I like the slimmer/in-line board. HX effects is in the FX Loop of the stomp (last in the path). I monitor with headphones (plus a HR 108) and need to use that FX block this way to be able to listen to everything through the headphone out on the stomp.
-
Had the same issue after 3.01 update and stumbled on the fix. May not work for you and don’t know why it worked for me. Go to the input block, the first dot on the signal path. Turn the bottom (physical) knob one click to the right, which will change the input to USB. Then, turn the knob one click to the left to change it back to the normal guitar input. After this, my sound came back. Had to do this to every preset and save each time. Sucked.
-
Thanks for the tip! Has anyone tried it out? I just bought a transformer adapter like the one linked above, along with an SM48 mic. Looking forward to testing on my Stomp - recording to Reaper.
-
Thank you! I’ll check to make sure the HX FX has the input set to Line level as well. Didn’t think about that.
-
My Stomp outputs into the HX Effects. Does anyone know if I should set the output level of the Stomp to Line or Instrument level? It’s noticeably louder in line level. From the HX effects, it goes out as Line level to a DI box, then to the mixer board.
-
I use a TS cable; not TRS
-
Don’t think it can be a global setting, but I use a Dunlop Volume X mini expression pedal and simply assign it as the amp’s “Channel Volume” controller so I don’t have to use a block. Allows me to keep overdrives in front and wet effects after. When scrolling to channel volume on the amp block, do a long-press on the button and it will let you change it to Expression. This video shows how to do that. Neat trick. I used a regular TS cable from the aux port of the volume pedal.
-
I also have my HX Effects (time/mod effects only) in a loop on the Stomp, but only at the end of the signal path. The reason I do it that way is for practicing with headphones. I wanted to be able to hear my effects through the headphones. You didn’t bring that up, but if you play through headphones, it would be an issue as far as I’m aware. Kilrahi - Do you know of a way to play through headphones and retain post-Stomp effects without using an FX Block in the Stomp? I have assumed that, because there is no headphone out on the HX effects, that this would not be possible. Would love a solution to not using a block in the Stomp simply to hear post-stomp effects through headphones. I guess we Stomp+Effects users could use a small mixer, but that’s no fun...and would take up a physical “block” on a table :)
-
I do. Got the effects first, paired with a Fly Rig 5, and that was my rig for several months. Then got the Stomp as a Christmas gift. I like that I can have a mini-fly Rig if I needed something compact for whatever reason. Strymon Ojai R30 powers both perfectly (for almost 2 months now). Get the 2.1-2.5 cable from Amazon so you don’t have to buy any adapters. Also get the voodoo labs current doubler for each unit. The FR5 is my backup.
-
I listed the link in the original post edit. As for your power question, I will have to defer to someone with more expertise. All I can tell you is that both of these boxes combined will require well over 1000mA. I got the Strymon because it checked that box.
-
I’ve edited the original post because the Strymon R30 powers both boxes perfectly using a current doubler for each and the special cable from amazon that allows you to not have to use the barrel adapter. So glad it worked!
-
Guess that means an R30 should work fine to power both units at the same time. Maybe someone will try it out before I get mine. Any other power supply suggestions?
-
Will a Strymon Ojai or R30 power supply handle both the HX stomp and HX effects using a couple of current doublers and 2.1 —> 2.5 adapters (without issue)? Is there a power supply anyone recommends? EDIT: Strymon Ojai R30 works perfect powering both. Also, I used 2 of these (one for each device) to avoid using the barrel adapter. They plug right into the current doubler cable and then into the device. https://www.amazon.com/gp/aw/d/B016BJGZ2U?psc=1&ref=yo_pop_mb_pd_title Also, I can use the adjustable 12 Volt port for my Tech 21 Fly Rig 5 if I were to ever need it for backup reasons.
-
Does this mean you cannot use a current doubler with the Pedal Power 2 Plus to power the HX? I’m guessing it cannot power it since the L6 ports are 250mA each...so doubling that isn’t even close to 2,000mA
