ElPuni

Hi guys, I was on a trip so I couldn´t try it before but I arrived today and had it working with your help. Neither impressed with the sounds, I´ll need to dig deeper on the profiles, thanks again!

I won´t be able to test it until next week but I´ll try as soon as I can and let you know the outcome. rd2rk, regarding the Mixer block, what I mean is that I don´t understand what "Pull down the MIX point to complete the split" means, but anyway it seems now I could download your attached file so that should work. Thanks again both, you´re being very helpful!

Thanks for the quick and complete answer, got a couple of questions anyway: -Regarding the Stomp, the file you attached appears as unavailable, I´ve followed your steps to create the preset but don´t know what you mean in step "Pull down the MIX point to complete the split". (Below how my patch looks): -Then in Studio One how do you select USB 3/4 as INPUT and USB 1/2 as OUTPUT? If I create a new Audio mono track I only see inputs from 1 to 7 (no USB). Edit: I found some info about that on Manual page 55, will try to figure it out but any help is appreciated Thanks again!

Hello, I´m trying to have my HX Stomp used as interface for Neural Amp Modeler Standalone software (https://www.neuralampmodeler.com/) but the output is both my clean signal into the Stomp and the processed signal from NAM. Chain is Guitar to Stomp connected to my laptop by USB as audio interface, and Stomp Output L to the Amp+Cab. When I play I get both the clean sound from the bass into the Stomp plus the processed signal from the NAM, and I´d like to avoid having the clean sound, only processed signal. Tried also to use NAM as VST plugin instead of standalone but my Studio One 6 doesn´t seem to show it (plugin appears as found in the loading screen but then I cannot find it in effects at Studio One). Any help is appreciated, thanks!

Thanks for the aswers, for the first one I´ve been trying to figure out how to activate a block from Command Center but I don´t get it, I only find how to send Midi to other devices or change only Presets, Snapshots or Looper (not blocks), but how can I activate the single Cab Block from there? And about SnapShots I already thought about it but I´d need another button (or SS) to activate/deactivate the Chorus so it won´t work, you´re missing the FS3-Chorus I guess if it´s possible at all.

Hello, let´s see if someone can help: with HX Stomp I feel some fuzziness using my bass with my 2 different distortions and have found it it corrected by adding a cab block, but I don´t like it activated with my clean sound, so: -All 8 slots are in use, FS1 assigned to Dist1, FS2 to Dist2, FS3 to a different effect (chorus) -By default Cab block must be disabled (clean sound) and if I activate any of my 2 distortion blocks I need to have the cab block activated also. I can assign FS1 to Dist1+Cab, but I´d need to have the Cab with FS2(Dist2) too. Is there any way I can do this without Midi? Attached a drawing of my signal, thanks in advance!

Thanks, will try it!

Thanks for the tool, just as an advice I used 2 different .hlx files to try and one of them didn´t load (https://line6.com/customtone/tone/6138678/) Will check it with more time at home.

It looks like a great idea, I cannot compromise myself as I don´t have time but would love to have a tool like that and do some tests.

I guess the Pod Go is already almost at the top of its possibilities, let´s see...

Any news about the update? It´s a very good tool but any improvement would be great

I agree 50% that PG has already enough amps/effects, but this time they have focused in synth effects which from my pov was a lack before the update, so very happy with that. Of course flexibility and new options are always a bigger plus for everyone knowing the limitations of the unit.

you can also check from page 32 in the manual (Bypass/Control chapter)

The limitation I miss the most in the PG is parallel path to be able to crossover the signal and apply effects only to the high freqs, keeping the low bass. Just guessing if maybe there´s a way to do something similar for example to distort only highs: In the chain, you put a HPF and distortion pedal after the cab block, then use both AMP and MAIN outs: AMP to keep the full freq clean signal, and MAIN to add the distortion only to the frequencies passed by the HPF, then joining both outs in the amp/frfr/whatever would maybe do the trick? If so, which HPF and setting (freq cut) would be the best for this setup? Anything I´m missing? Would that be doable?

That´s right, if it´s set to cab/ir it will also bypass the effects behind the cab position.

Need help from PodGoers and wah on bass: I´m a bass player and love my Dunlop 105Q crybaby, and was hoping to get a similar sound with any of the wahs in Pod Go but to me they sound too much high and uncontrolled (maybe good for guitar, but unusable for bass to me), and I cannot find a setting to have them usuable on bass. I already tried cutting higher and lower freqs, etc, but still too thin and open to my like. I could use any advice: model, settings, whatever. Thanks in advance!

You can check the port color: Black or white Ports and plugs Type-A or type-B Blue (Pantone 300C) Ports and plugs Type-A or type-B, SuperSpeed Teal blue Ports and plugs Type-A or type-B, SuperSpeed+ Green Ports and plugs Type-A or type-B, Qualcomm Quick Charge[9] Purple Plugs only Type-A or USB-C, Huawei SuperCharge Yellow or red Ports only High-current or sleep-and-charge

Cool, I still have to check myself, PG Edit neither likes my laptop USB ports.

I also do and it keeps disconnecting from time to time, take into account there are different USB ports. I still couldn´t try with a powered hub but they say it works better for this.

Regarding disconnections it´s a known issue in all PG Edit versions I guess, it also happens to me. They say using a powered usb hub fixes it.

In my case as Saxatron says the problem was when the driver was installed automatically (I tried in 3 different computers and always the same issue) and the only solution I found after different approaches was to right button pod go in device manager and manually select the existing driver to setup (browse my computer for driver software->Let me pick from a list...->select Line6 Pod Go driver). To me it doesn´t seem to have any sense at first, as that´s the same driver Windows is trying to install (the one that comes with Pod Go Edit), but it only works to me if I do it manually. When I updated PG Firmware last week it happened the same: Windows updated the driver automatically and it appeared as error again on Device Manager, I right clicked following the steps above, selected the updated driver manually and it works again.

In my case, if I remember properly, in the list appeared 2-3 different lines but all of them as "Line 6 Pod Go". I just looked at the most recent date and selected it and worked. You can always try each one by one to see if it works.

I had this same issue with my 3 computers at home, finally could fix it selecting manually the drivers instead of letting Windows doing it automatic: update driver->browse my computer->Let me pick from a list, and manually selected the right Line6 driver. Did this in all the 3 computers and working, hope this helps.