TimsonVomDach

Thank you again for your effort! I at least understand the different parameters better now. Just have to go with little more trial and error and I'm pretty sure it will work after a little more corrections ;-)

No, i did nothing including a volume block. I play in punk rock band we just have full volume or no volume ;-) In the attachement are my two presets that make the trouble. Don't mind the names. Those are bavarian words ;-) But with the video from your last comment and 'The problem you are encountering sounds a lot like the intended behavior of the Wah when 'Behavior' = "Toggle"' I have some new information: At first, you are right with the description. So one preset allways works like in Jonnys video and the other one always toggles when i move it up and down. Sorry for the confusion I didn't know how to describe it better. And second, contrary to video you attached in your last comment when I change the behaviour of the bypass in HX Edit, change the preset and go back the behaviour always goes back to toggle. This happens in both of the presets and even when I save it. So maybe this bug causes that my changes are not taken over correctly which leads to this mysterious manner. The pedal should come up bypassed when changing to one of those presets. DRUM SCHELLN.hlx MOTORSAECH.hlx

Thanks again for all the input! I'm aware of the difference between snapshot an preset. And as I'm pretty new to the Helix toppic I'm still working on my basic settings and have not made up any Snapshots yet. With 'Shut down' and 'Reboot' I simply meant turning it off and on again ;-) I now switched the wah pedal to EXP 1 und activated Heel Down in both presets. But it still has the same effect. In one preset the wah works as it should and in the other one like i discribed in the beginning.

Thanks HonestOpinion for your tipp. I have changed the setting as you suggested. In both the presets where I want to user the wah like that it is set to EXP 2 so this is the one I changed to 'Global'. (Also tried it with 'Per Preset'. 'Per Snapshot' was the default entry) But now things are getting more mysterious. When I turn on the Helix the last of these two presets that I used before the shut down works as I desire. The other one does the same thing like before. And when I shut down on another preset and reboot one of the two presets is chosen by accident where the wah works like I wish to. The other one is stillt in the mode like in the beginning. Do you have any explanation for this?

Hey people, got a problem with setting up the wah pedal on my Helix. My target is to set it up like Jonny in this video: Line 6 Helix Wah settings TIPS and TRICKS. - YouTube So for everybody who doesn't want to watch the video: I want to work like my old Bad Horsie 2. Selecting my wah pedal and chosing the Expression Pedal as the bypass switch on 0% (have tried with a little more % but it doesn't work either). Min Position on about 15%. With that setup it should automatically be activatet when I use the pedal and when it comes down to zero again or below the certain value that I choose for the position parameter it should be off. And here's the problem when I set it up like that: The wah is off in the beginning. When I use the expression pedal nothing happens. When I reach my bypass value the wah is turned on. Then I can use it until I hit the bypass value again. Then to activate it again I have to use the pedal and come down to the bypass value and so on and on. Sometimes when I set my wah pedal up again the exact same way it works as it should until I change something. But most of the time it only works as discribed above. Has anybody any tipps for me?