Search the Community
Showing results for tags 'high'.
-
Hello guys, I have a hybrid setup with an HX Stomp acting as the core of it. The signal flows in this way: GTR ->Pedal Pawn Fuzz -> Crybaby->Vertex Effects Buffer Interface-> Hx stomp Input I have some ODs in the LEFT effect loop Right effect loop is used when I want to use a real amp with 4CM Left output goes to Amp return when using 4CM, L/R outputs go to FOH otherwise. I built the pedalboard to have the maximum flexibility in terms of routing. Now, when using the Stomp with amp sims I noticed a high pitched feedback/squeal (like a microphonic pickup type of squeal), the only fact is that I was playing with headphones so any microphonic pickup issue should be off the table, I also tried to switch guitars and to my surprise nothing changed. I went through the troubleshooting and I plugged the guitar directly intop the Stomp and I could go with the highest of the gains without problems, I also plugged into the PP Fuzz and the Wah bypassing the buffer interface and I came to the conclusion that the "problem" is the buffer interface. Do you have any explanation for that? That interface cost me a lot and I would not like to sell it or to put it off the board. Thank you in advance for the answers.
-
I'm still getting the hang of my IV 150 and haven't found any help elsewhere so hopefully y'all have some experience with this. I've noticed that when playing softly or when two notes are ringing out (maybe during a bend) the volume cuts in and out very subtly, like a tremolo almost. This mostly happens with the high gain models and I'm pretty sure it's happening because the strings volume kind of fades in and put while being held. I think half of the 'signal' is getting caught by the noise gate. I was wondering if anyone has a favorite setting they like for NR, Gate or Gate+NR? Or do you recommend using it at all? I've read some people just turn it off altogether.
-
Streaming music through the Amplifi is awesome . . . sounds crystal clear. The guitar on the other hand sounds muddy, thin, and fake. It seems that no matter how I adjust the tone controls (whether on the amp modeler, effects, or on the amp itself). I don't know a whole lot about sound dynamics, but it seemed a lot easier on my Spider IV - I love the sound I get from there, but can't seem to get the same from the Amplifi. Any advice would be much appreciated!