Search the Community
Showing results for tags 'midi over usb'.
Found 2 results
Hi Guys, anybody tried synchronizing tempo on Helix with MIDI CC from DAW? I used to this with POD HD and it worked fine but doesn't seem to work with Helix. Here is what I do: Helix manual says Tap Tempo is MIDI CC #64 with values 64-127. So I assume any value in this range is fine. As DAWs often don't send the same CC value repeatedly, I send values 127-126-127-126 etc. in sequence. Nothing happens, preset tempo stays the same. Just to check on something more obvious I change the CC to 57 (FS10) and voila, now the footswitch diode blinks rhytmically. So my setup seems fine, sending CCs works fine for #CC 57 but #CC 64 doesn't seem to affect Helix. Anybody tried and succeeded or has any hints? I'm on the latest firmware 1.10 and drivers (coming with Helix app 1.11). Helix is connected via USB to my Win 8.1 laptop. I tried sending the MIDI CC messages from FL Studio and Cubase, the same result (i.e. nothing...). Thanks for any help. I think I'm gonna raise a support ticket now...
I'm thinking about getting the Pod HD (bean) and the FBV EXPRESS MkII. I don't really need the full HD500/X floorboard. So, can an FBV EXPRESS MkII control a Pod HD (bean) and another MIDI device over USB via a computer? Long version: I want to have a Behringer DEQ2496 (a fancy programmable digital EQ) connected to the Pod HD via S/PDIF (via Coax/RCA to optical converter or RCA to AES/BEU adapter) and change with the patch changes on the Pod HD. It could help with dialing in some patches. Now, I know the Pod HD (bean) doesn't have MIDI connectors. The FBV EXPRESS MkII manual says that it will send MIDI via USB and (at least with the X3) could be connected through a computer and send MIDI changes between the Pod and the floorboard (over USB). Can it also send changes to the DEQ2496 (via MIDI adapter connected to the computer)? It sounds like you can't connect the floorboard to the Pod via Cat5 and use USB on the floorboard at the same time, so USB all around would be required. The Pod HD isn't sending MIDI over USB, right? So the floorboard (and computer) has to be in the mix to change both devices. Short version: So all 3 devices would be connected through a computer. Hit a pad on the floorboard and have the bean change patch and the DEQ2496 change to the appropriate EQ patch. Anybody tried anything like that? I've done a little MIDI software dev stuff - so if the devices are sending/receiving anything across MIDI (via USB) - I can probably sync them up. It would be nice if it just worked, though. I played with DEQ2496 on an X3 Live years ago and it worked well and helped dial in the sound a bunch. Of course, you didn't need the computer in between. I'd guess it would work with the HD500/X easily, too. Searching on the FBV EXPRESS MkII (on this forum) doesn't instill a lot of confidence that it works well with the Pod HD (bean), though. I'd just like some patch switching, control the looper, and have the expression pedal. Any thoughts? Chris