Jump to content

Search the Community

Showing results for tags 'bean'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Share your Settings
    • Line 6 Lounge

Categories

  • General FAQ
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • Firehawk
    • FBV Controllers (MKI / MKII/ 3)
    • M5 / M9 / M13
    • JM4 Looper
    • Stompbox Modelers / ToneCore
    • ToneCore Development Kit
  • Recording
    • Helix Native
    • Echo Farm/Amp Farm
    • POD Farm / POD Studio / TonePort
    • Computer Audio Set Up and Troubleshooting
    • Riffworks Line 6 / Standard Edition
  • POD
    • POD HD Family
    • POD HD500/HD500X
    • POD HD300/400
    • POD X3 Family
    • POD 2.0 / PODxt Family / Pocket POD / FloorPODs
  • AMPLIFi Series Products
    • AMPLIFi 30/75/150/TT
    • AMPLIFi FX100
    • Videos
    • Tone Creation
  • Amplifiers
    • Spider V
    • Powercab
    • Firehawk 1500
    • DT50/DT25
    • Spider IV/Spider Online
    • Spider Valve
    • Spider Jam
    • Vetta
  • Live Sound
    • Relay/XD-V Digital Wireless
    • StageScape M20d Mixer
    • StageSource Speaker
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
    • 1st Gen Variax Guitars / Bass / Workbench
  • Mobile Products
    • Sonic Port devices / Mobile In
    • Mobile Keys
    • MIDI Mobilizer
    • Mobile POD app
  • Dream Rig
  • Legacy Products
    • Amps
    • POD
    • Effects and Controllers
    • GearBox
    • Line 6 X2 Digital Wireless

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

Found 11 results

  1. Hi, Recently I updated my system to a beta version of mac osx sierra and because of this I'm unable to use my pod hd bean. Line 6 Monkey is able to determine the device and shows options to update drivers. After updating the drivers there is an automatic restart and line 6 Monkey shows me the same old driver and gives an option to update. Have tried installing the drivers manually from the line 6 website but still the same issue. It is not possible now to downgrade the mac to older OS. Any help appreciated. Thanks!
  2. LAEDGE

    Ac Adapter For Pod Hd?

    Hi I think I may have a faulty ac adapter for my Pod HD Bean. Anybody know where I can get a replacement, or if there is an alternative? I live in Australia by the way, so I need something suited for my region (PAL) Thanks! :)
  3. I'm trying to use midi triggers with my POD HD bean. like at a certain time it'll go to a certain effect. is this available with the bean? i read about gearbox. i need more help...
  4. I'm thinking about getting the Pod HD (bean) and the FBV EXPRESS MkII. I don't really need the full HD500/X floorboard. So, can an FBV EXPRESS MkII control a Pod HD (bean) and another MIDI device over USB via a computer? Long version: I want to have a Behringer DEQ2496 (a fancy programmable digital EQ) connected to the Pod HD via S/PDIF (via Coax/RCA to optical converter or RCA to AES/BEU adapter) and change with the patch changes on the Pod HD. It could help with dialing in some patches. Now, I know the Pod HD (bean) doesn't have MIDI connectors. The FBV EXPRESS MkII manual says that it will send MIDI via USB and (at least with the X3) could be connected through a computer and send MIDI changes between the Pod and the floorboard (over USB). Can it also send changes to the DEQ2496 (via MIDI adapter connected to the computer)? It sounds like you can't connect the floorboard to the Pod via Cat5 and use USB on the floorboard at the same time, so USB all around would be required. The Pod HD isn't sending MIDI over USB, right? So the floorboard (and computer) has to be in the mix to change both devices. Short version: So all 3 devices would be connected through a computer. Hit a pad on the floorboard and have the bean change patch and the DEQ2496 change to the appropriate EQ patch. Anybody tried anything like that? I've done a little MIDI software dev stuff - so if the devices are sending/receiving anything across MIDI (via USB) - I can probably sync them up. It would be nice if it just worked, though. I played with DEQ2496 on an X3 Live years ago and it worked well and helped dial in the sound a bunch. Of course, you didn't need the computer in between. I'd guess it would work with the HD500/X easily, too. Searching on the FBV EXPRESS MkII (on this forum) doesn't instill a lot of confidence that it works well with the Pod HD (bean), though. I'd just like some patch switching, control the looper, and have the expression pedal. Any thoughts? Chris
  5. Hey guys, i'm in serious need of some better sound. I want to get a 4x12 cabinet, i have been looking at something like the Line 6 412VS so i can finally use the stereo capabilities of my POD HD... Just wondering, can i plug it straight into the cabinet and have it work? Or will i need a Stereo Poweramp or something?
  6. robmlisanti

    Pod Hd Bean Gig Bag?

    Can anyone tell me if the Line 6 PODXT Gig Bag (Heavy Duty Padded Bag) will fit the POD HD Bean ( Black one)? some people say its too small
  7. Line6Tony

    POD HD Desktop FAQ

    Please download and read the following manuals for the POD HD500 and POD HD500 Edit Software: POD HD Quick Start Guide POD HD Advanced Guide Power Adapter: Included line 6 DC-3g only (9V DC, 3A, 2.5mm barrel diameter, center pin negative) Q: How many amp models are included in the POD HD? A: When updated to flash memory version 1.31, POD HD devices have 22 Full HD guitar amp models, and 22 HD guitar pre-amp versions of the full models. Q: How many effects are included with the POD HD modelers?A:The POD HD modelers sport 80, 90, and 100+ effect types respectively derived from the Line 6 M9/M13 effects processors. Click HERE for a complete list of effects models. Dynamics: 8 Distortion: 15 Modulations: 22 Filter: 17 Pitch: 3 EQ: 5 Delays: 19 Reverbs: 12 Volume Pan Wahs: 8 Q: How do I register my POD HD? A: You can register any Line 6 product to your account here: Registration. For more detailed registration help, please see the Product Registration F.A.Q. Q: What is the warranty on the POD HD?A: Twelve months from the date of purchase. Authorized Line 6 Service Centers, will need you to provide a copy of the purchase receipt to validate date for warranty processing. Please be sure to have those materials ready, should you need to get your unit serviced under warranty. Q: How do I perform a Factory Reset on the POD HD? A: A factory reset on the POD HD is performed by re-installing the Flash Memory using the Line 6 Monkey utility. Please ensure to connect the POD HD to a PC or Mac computer via USB 2.0 ports. Please ensure to disconnect all unnecessary USB devices and to test all of the computer's USB ports if you encounter connection problems. You can view a video tutorial on how to re-install the flash memory of the POD HD500 here: [Video Tutorial] How to Reset the POD HD by updating or reinstalling the Flash Memory Q: How do I access the global settings screen on the POD HD? A: Press and hold the VIEW button to the left of the LCD screen on the POD HD to enter the SETUP pages of the POD. Press the Left and Right arrow buttons on the 4 Way Nav to access all of the SETUP pages where you can set your inputs, outputs, MIDI settings and more. Q: How do I reset the global settings of the POD HD? A: Press and hold the Left Arrow button on the 4 Way Nav as you power on the POD HD. This reset resets the global settings back to factory defaults and also renames the Set Lists to factory as well. NOTE: This DOES NOT reset the presets of the POD HD. That requires re-installing the flash memory using Line 6 Monkey. (Same as Factory Reset above.) Q: How should I set the OUTPUT MODE on the POD HD? A: The OUTPUT MODE can be set in PAGE 4 of the global settings pages. NOTE: This setting affects ALL of the outputs of the POD HD: 1/4" unbalanced L/R outputs, the headphones output, and the USB record sends 1-2 into your computer. OUTPUT MODES Studio Direct: For connecting “Direct” to a mixing console (PA) or recording device. Also, this is the best setting for using headphones or monitor speakers. Combo and Stack Settings: These 4 options are all designed to optimize your tone for connecting to an external amplifier. The signal includes "Live' Cab Models, with no Mic Model or "AIR" convolution, with a special EQ curve added for each. Combo Front and Stack Front - For connecting the output of the POD HD into the front input of a typical combo amp or amp head + external cab, respectively. When choosing either of these Modes, you will see additional optional for further tone shaping. Combo Power Amp and Stack Power Amp - For connecting the output of the POD HD into the power amp or Effects Return of a combo or head amp. Ensure to set the Master Output of the POD HD to to a high output setting for this output mode. Use this setting to bypass the front preamp of your amplifier to use the POD as the digital preamp being fed directly into the power amp section of the amp. NOTE: If plugging into the effects return of an amp, set any loop level controls to 100% if available. May get lower output in amps with parallel effects loops by design. Sometimes, you may need to insert a dummy 1/4" into the amps input to make this connection work. Q: Which foot controllers are compatible with the POD HD desktop device? A: The FBV Shortboard Mk II will give you access to the most features of the POD HD by providing you the ability to access all of the presets within the Set Lists' of the POD along with giving the ability to toggle all effects on/off, control over the built-in looper, tuner enable/disable, and the ability to program the Expression Pedal(s) to control parameters of the amps and effects on the POD HD. You can use the FBV Express Mk II pedal for changing between presets, tuner, and expression pedal control. With either pedal, to create and edit Foot Switch assignments, select the desired FX or Amp Block within the Signal Flow View, then hold the Enter button. This displays the FS ASSIGN screen. All assignments are saved per Preset. Q: How do I enable the Wah effect with the expression pedal of FBV controllers when connected to the POD HD? A: When you assign a wah effect (or any other effect) to be toggled on/off by the Expression Pedal Toe Switch of the FBV controller, in order to physically enable or disable the effect, you must press down hard on the front toe portion of the expression pedal. You must use a good amount of pressure pressing down on the toe of the expression pedal which makes it difficult to do with your hand. Place the pedal on the floor and press down hard on the toe of the expression pedal with your foot. You should see the green Volume light change to red WAH (or vice versa). Q: How long is the looper on the POD HD? A: At full speed, the looper has 24 seconds total looping time. In 1/2 Speed Mode, the looper has 48 seconds total looping time. Q: What is the new TWEAK knob for on the POD HD? A: Controls amp or effect parameters that are assigned to TWEAK in the CONTROLLER ASSIGN screen as you would with expression pedal of an FBV controller. Select the desired amp or FX block, then doouble-press the MOVE button to enter the CONTROLLER ASSIGN screen. Q: What are Set Lists and how do I access them? A: The POD HD stores up to 64 presets within each of the 8 Set Lists. Press the PRESETS knob to display the Set Lists screen. Use the 4 Way Nav, or turn the PRESETS knob to select any Set List, then press the ENTER button. This immediately loads the selected Set List, making all its presets available. Q: How do I manage the presets and settings of the POD HD on my computer? A: Download and install the POD HD Edit software to edit or create the presets of the POD HD on your computer. You can store the presets of your POD HD to your computer, and load presets from your computer that you create or download from Customtone.com. (POD HD Preset section coming soon.) You can store the presets of your POD HD to your computer, and load presets from your computer that you create or download from POD HD Edit Pilot's Guide for how to use the program with your POD HD hardware. Q: Which external expression pedals can I use as EXP 2 with the FBV Shortboard POD HD? A: We recommend using the Line 6 EX-1 or the Mission Engineering EP1-L6 expression pedals. You can also use any other expression pedal containing a 10k Ohm Potentiometer. Expression pedals allow you to change stompbox controls using your feet so you can adjust the sound while you play. On the fly, you can modify the length of your delay time, dial up the reverb mix, or change the depth of your tremolo, or anything you program the expression pedal to control on the POD HD. Q: How do I assign an effect or amp block to be toggled with a foot switch of an FBV controller? A: In the Signal Flow screen, select the FX or Amp Block which you want assigned to one of your footswitches. Then Press and hold the ENTER button to display the Footswitch Assign screen. The Footswitch Assign page is display is similar to your Signal Flow view. Use Multi-function Knob 1 to select the footswitch to which you want this FX Block assigned. You can also just press the FS switch you would like to assign it to that amp or effect. NOTE: you can assign multiple FX Blocks to a single footswitch or Exp Pedal's "toe switch". You can reference the current Preset’s FX footswitch assignments by pressing the VIEW button to display the Performance View screen. Q: Does the XLR Mic input provide Phantom power for condenser microphones? A: No, the XLR Mic input does not provide Phantom power. You would need to use an external preamp to provide Phantom power to the condenser mic before connecting to the POD HD. Q: How do I calibrate the Expression Pedal of the FBV controller when connected to the POD HD? A: Please go over the following POD HD500 Pedal Calibration document for instructions on how to calibrate the expression pedal of an FBV controller when connected to a POD HD desktop device. The instructions are the same as for the POD HD500. Q: Does the POD HD desktop have Line 6 Link or MIDI connections? A: No, the POD HD desktop does not have physical connections to communicate via L6 Link or MIDI. Q: What Sample rates does the POD HD Support? A: The POD HD Supports 44.1, 48, 88.2, and 96k at 16 or 24bit
  8. Q: How to resolve a blank screen on a PODxt LIVE A: If you are getting a blank screen on your PODxt LIVE please try the Edit Buffer Initialization with the following steps: 1. Turn off the POD 2. Turn on the POD while holding down the Save and Edit buttons simultaneously 3. The POD's LCD screen should display Init Edit Buffer 4. Push the Output mode button 5. Turn the Select / Select Page knob one click to the right 6. Turn the Effect Tweak / Change Value knob to the left or right adjusting the contrast. If this does not solve the issue for you please locate your local Service Center for repair. Q: I purchased a MODEL PACK and can't find any of the new features on my device. A: Please run Line 6 License Manager and authorize your purchased MODEL PACK/s for use with your Line 6 Devices and Software. 1. Download and install the latest version of Line 6 License Manager for your operating system from the Line 6 software page. Go to the following link for software downloads: Line 6 Software downloads. 2. Before launching the Line 6 License Manager, be sure to have your Internet connection active (and your Line 6 device connected, if you are using one). 3. Launch the License Manager: On Mac® - Go to /Applications/Line 6/Line 6 License Manager. On Windows® - Go to Start menu\Programs\Line 6\Tools\Line 6 License Manager. 4. Log in to your Line 6 account. 5. Select the device to which you want to authorize for use with your licenses and click the Authorize button. 6. Once the Authorization process completes, you may be prompted with a screen informing you that your Line 6 device includes some Add-Ons that need to be “Installed” on your device. If you are presented with this screen, click the Install button to proceed. 7. At this point, you are able to use your licenses on your authorized device. Repeat this process with any other devices you want to authorize for use with your licenses. Note: The installation of your model pack will not add presets to your device/program, it will add more AMP or EFFECTS models. Q: I am trying to set up my POD XT Live and on the what are you connecting to screen I cannot get it out of Studio/Direct mode. A:When headhphones are plugged in, the POD XT Live defaults to Studio/Direct mode. Please unplug the headphones and it should give you the other connection options. Q: How do I calibrate the pedal on my PODxt Live? A: 1. Make sure there is nothing connected to your PODxt live aside from the power cable. 2. Power up the PODxt Live while holding down the Bank Up pedal 3. Press the Amp pedal (this will reset the current settings) 4. Move the pedal all the way to the heel back position, then all the way forward until the toe switch clicks. You will want to stand up and shift all of your weight to the toe position until you see the WAH light turn on. 5. Wait 10 seconds, then power the PODxt Live off and back on again. 6. Your pedal is now calibrated. Q: What type of pedal should I use for the external expression pedal? A: The Line 6 EX-1 is the pedal recommended for use with all Line 6 gear. You should be able to use any expression pedal with a 10K potentiometer if you do not have an EX-1 available. Q: Can I calibrate the external expression pedal? A: There is no calibration method for the external expression pedal. PODxt Family Error Codes If you are experiencing the following error codes in the display of your PODxt device: Invalid Error Code 01 Invalid Error Code 02 Invalid Error Code 03 Invalid Error Code 04 Invalid Error Code 05 Invalid Error Code 06 please try the following: Try the Edit Buffer Initialization with the following steps: 1. Turn off the POD 2. Turn on the POD while holding down the Save and Edit buttons simultaneously 3. The POD's LCD screen should display Init Edit Buffer 4. Push the Output mode button 5. Turn the Select / Select Page knob one click to the right 6. Turn the Effect Tweak / Change Value knob to the left or right adjusting the contrast. If that does not help, please try re-installing the flash memory on the PODxt device using the instructions in the following link: Pod xt Series: Factory Reset, Reflash, and Firmware Updates If this does not solve the issue for you please locate your local Service Center for repair.
  9. So you got the perfect sound... Now you want to save your own patch... Press 'SAVE' to bring you to the "SAVE TO:' screen. The bottom 4 knobs are critical to this process as they change the values that are directly positioned above. The first knob alternates between saving in Tone 1 and Tone 2, the third knob moves the cursor left and right, and the fourth knob changes the character that the cursor is positioned under. Use these knobs to select whether you want to save the patch to Tone 1 or Tone 2 and to change the name of the patch itself. Once you have set the name and tone position, use the save knob to choose which bank you want to save this to, then press the save knob again to save it.
  10. Line6Tony

    POD X3 upgrades and Compatibility

    Q: Can I upgrade my XT device to an X3? A: Here is the list of model packs included on the X3, model packs that are included on XT devices are listed after the model pack: Power Pack(included on the Pod XT series) FX Junkie (included on the Pod XT Live) Collector Classic Metal Shop Bass Expansion (included on the Bass Pod XT) Please note that the FX Junkie, Collector Classic, and Metal Shop model packs can be purchased as a Triple Pack for a savings of ~$50. Q: How can I upgrade the hardware on my XT series unit? A: The other differences such as the effects loop, XLR input, etc. are hardware improvements that cannot be upgraded. Q: Does Line 6 offer a trade-in program for my XT unit for an X3 unit? A: We recommend seeing your local Line 6 dealer regarding the possibility of trading your XT unit for an X3 if you are interested in obtaining an X3 at a lower price. Q: When will Gearbox and the Gearbox plug-in be available for the Pod X3 series? A: We released a compatible version of Gearbox on February 29th, 2008. Q: Is the POD X3 series compatible with Riffworks? A: Yes, you must download and install Riffworks Line 6 Edition version 2.22 or better from the downloads page.
  11. The POD X3 offers a fun feature that allows you to create patches on Tone 1 and Tone 2 and blend them together or sweep from one patch to another using the expression pedal on the Live. For any musician seeking seamless patch switching, this is the feature for you! Setting up this function is simple: 1) Set the volume on patch 1 at 100% heel, 0% toe (Page 5.16 of the user manual.) 2) Set the volume on patch 2 to the exact opposite, 100% toe, 0% heel. 3) Now rock the pedal back and forth. The pedal will now blend from 100% Patch 1 to 100% Patch 2 and anywhere in between.
×