Search the Community

Hi, not quite sure where to put this, however, I though it was worth sharing. I am close to finishing a DIY controller for my HX stomp based on an Arduino nano. Building it is easy with some drilling and soldering skills, changing Midi commands (and sequences) according to your preferences is easy. It cant do all the things a morningstar MC6 can do, but it comes with a 4-line Display and 6 switches, so it may look similar. All you need is a Hammond 1590xx enclosure, an Arduino Nano, an LCD display, a midi Jack, a DC power jack, 6 momentary switches, and a few resistors. It's actually so simple, I am thinking of not even making a Circuit board for it. Overall costs will be around 50 €. I would provide the software for free, once it's done. If you would like to donate what it's worth for you, I would be thankful ;-) Here is a picture of two Banks that are already working: What it can do: Button Action: Single Press, Long Press Toggle Values of Blocks via Midi CC ("Toggle Solo Boost" in my example) Activate/Deactivate Blocks via Midi CC Change Presets (via Midi PC) Activate/deactivate the Tuner Change Snapshots Change the Footswitch Mode on the HX Stomp (Snapshot Mode, Preset Scroll mode, Preset mode, Stomp Mode) Downsides: No webinterface - to change midi, you will have to change the arduino code (it's actually easier than it sounds) No Midi in, so it's a one-way-street from the controller to the HX or Helix or whatever device you are using Anybody interested?

Afternoon all I want to use an expression pedal connected to my Morningstar MC8 to control overall patch/preset volume of my HX Stomp via MIDI. I know I could assign the expression pedal to a volume block but I'd like to know what parameter in the amp block you guys (and gals) would assign it to if you had used up all the Stomp blocks ; channel volume or master volume? Obviously the pros of the volume block are I could put it anywhere in the chain but assigning it to an amp parameter frees up that block for something else Thanks Ben

hello, I would like to know if anyone has had good or bad experiences using the Jackson Audio via MIDI together with the HX STOMP. I would use them controlling with the Morning Star MC3 but, I have been told that there is some latency with the use of the switch on those pedals.

Bonjour Lorsque j'active le midi clock sur mon Helix en utilisant un morningstar midibox, pour l'envoyer dans des jacks trs pour synchroniser mes effets externes, (empress, jackson audio, souce audio, meris, eventide) un bruit qui fait tac tac tac apparaît, impossible de m'en défaire et cela est très désagréable dans mon son si je compresse le signal et que j'égalise un peu les algues de ma guitare, c'est évidement encore pire, je ne sais plus quoi faire ... ... aussi de temps en temps, dans le bruit du souffle apparait des longs sifflements aussi très désagréable... merci de me venir en aide bien a vous Hello When I activate the midi clock on my Helix using a morningstar midibox, to send it to trs/jacks to synchronize my external effects, (empress, audio jackson, audio souce, meris, eventide) a noise that tac tac tac appears, impossible to get rid of it and it is very unpleasant in my sound if I compress the signal and I equalize the algae on my guitar a little, it's obviously even worse, I don't know what to do ... ... also from time to time, in the sound of the breath appears long whistles also very unpleasant ... thank you for helping me best regard