Search the Community
Showing results for tags 'wrenches'.
Q: What is 'radius' on a neck? A: Radius refers to the amount of curve on the fretboard. A smaller number (i.e. 9.5") has a more pronounced curve than a larger number (i.e. 12"). Players who emphasize chording may prefer more round necks, while players who do a lot of bending may prefer flatter necks. Q: What is the nut width on the Variax electric guitars? Variax 300: 1 11/16" Variax 500: 1 5/8" Variax 600: 1 5/8" Q: What is the difference between maple (i.e. Variax 600) and rosewood (i.e. Variax 300) fretboards? A: Maple tends to be a bit brighter in tone, while rosewood tends to have a bit more sustain. Maple fretboards have some type of lacquer finish, as rosewood is traditionally unfinished. Q: What is "neck scale"? A: Neck scale is the distance from the bridge to the nut. All Variax electric guitars have a scale of 25.5" Q: What fretwire is used on the Variax Electric guitars? A: The closest fretwire in common use is the Dunlop 6130 wire, but it is not exactly the same wire. Q: What size allen wrenches are used on the Variax electric guitars? Tremolo arm and saddle height adjustment: 1.5mm Bridge height: 2.5 mm Truss Rod: 4mm Q: What kind of finish is used on the Variax? A: All Variax instruments use a polyester (yes, polyester) finish. Q: What type of glue is used in the hardware? A: Hide (i.e. horse) glue Q: What gauge D'Addario strings are on the Variax electric guitars? E: 10 (High) B: 13 G: 17 D: 26 A: 36 E: 46 (low) Variax Bass 700/705 B .130 (five-string model only) E .100 A .080 D .065 G .045 Q: What is the hole diameter for the tuning gears? A: The Variax guitars accept the standard 10mm (13/32nd") tuning gear. Q: What happens if I use different brand or gauge strings on my Variax bass or guitar? A: The results will be the same as changing string type or gauge on an analog bass or guitar. The Variax guitars are no different than most other guitars regarding setup and maintenance; the may need to be set up for different gauges play correctly, or seasonally to counteract climate changes. The Variax will accept any common string gauge for that instrument type. Q: Do the Variax guitars have a low or high output impedance? A: All Variax guitars are low impedance, and should be treated like they are active instruments. Q: What are the default custom positions? Contents of Custom 1 Knob Positions: Knob Position / Pickup Selector Position & Original Model Location Custom 1/1 Acoustic/5 Custom 1/2 Reso/4 Custom 1/3 Acoustic/4 Custom 1/4 Reso/2 Custom 1/5 Reso/1 Custom 2 Positions feature hybrid models and alternate tunings created from Variax Workbench,Knob Position / Pickup Selector Position & Custom Tuning Custom 2/1 Spank with R-BillyTron Bridge Drop D Custom 2/2 R-Billy Sparkletop with R-billy D'almond Bridge & Middle Open A Custom 2/3 T-Modle F-Hole with Lester/Bridge Open D Custom 2/4 Special Bird with Chime Toaster/Middle Open C Custom 2/5 Tricone Reso Open G
Version franÃ§aise. Deutsche Version. Every James Tyler Variax guitar includes the following accessories: One Workbench interface One USB cable One Category 5 Variax Digital Interface cable One Allen wrench tool set One battery (*US made JTV guitars are shipped with 2 batteries) One battery charger One battery charger power supply w/ international adapters Allen wrench sizes: (for JTV 89) 1 -“ 4mm hex, for truss rod adjust (relief) 1 -“ 5/64" hex, for individual piezo level intonation adjust (intonation) 1 -“ 7/64" hex, for bridge post adjust (action) 1 -“ 3/32" hex, common generic tool in most guitar tool kits 1 -“ 5/32" hex, common generic tool in most guitar tool kits 1 -“ 0.050", for bridge set screw horizontal overall Bridge intonation adjust (intonation) 1 - 1.5mm, for tremolo set screw [even though the 89 is a set bridge] 3/32 and 5/32 are common generic tool in most guitar tool kits that use linear, rather than metric parts. ==================================================================================== (for JTV 89F) 1 - 4mm hex, for truss rod adjust JTV-89F (relief) 1 - 5/64" hex, for individual piezo level intonation adjust (intonation) 1 - 7/64" hex, for Locking nut and bridge string locks 1 - 3/32" hex, common generic tool in most guitar tool kits ==================================================================================== (for JTV 59 and 69) 1 - 1.5mm hex, for tremolo set screw adjust on the JTV-69 series 1 - 4mm hex, for truss rod adjust JTV-69 (relief) 1 - 4mm hex short arm, for truss rod adjust JTV-59 (relief) 1 - 5/64" hex, for individual piezo level intonation adjust (intonation) 1 - 7/64" hex, for bridge post adjust (action) 1 - 3/32" hex, common generic tool in most guitar tool kits 1 - 0.050" hex, for bridge set screw horizontal overall Bridge intonation adjust (intonation) 3/32 is a common generic tool in most guitar tool kits that use linear, rather than metric parts. ==================================================================================== (for the Variax Standard) 1 - 4mm hex, for truss rod adjust (relief) 1- 1.25mm hex, piezo saddle height adjust (action) (for the Shuriken) 1 - 4mm hex, for truss rod adjust (relief) 1- 0.050 inch hex, piezo saddle height adjust (action) If any of these items are missing from your new JTV purchase, feel free to submit a support ticket at line6.com/support. We will route your request to our Parts department for fulfillment. Les Ã©lÃ©ments suivants sont inclus avec tous les guitares James Tyler Variax : Lâ€™interface Workbench. Un cÃ¢ble USB. Un cÃ¢ble Cat 5 Variax Digital Interface. Un ensemble dâ€™utiles Allen. Une batterie (les guitares de la sÃ©rie US ont 2 batteries). Un chargeur de batterie. Une alimentation pour le chargeur de batterie. Avec des adaptateurs internationales. Toutes les clÃ©s Allen : 1x 1,5mm 1x 4mm 1x 2mm 1x 2,8mm 1x 2,4mm 1x 1,3mm Si un de ces Ã©lÃ©ments manque, n'hÃ©sitez pas Ã soumettre un ticket de support sous : www.fr.line6.com/support Alle James Tyler Variax Gitarren beinhalten folgendes ZubehÃ¶r: Die Workbench Interface. Ein USB Kabel. Ein Cat5 Varaix Digital Interface Kabel. Ein Set InbusschlÃ¼ssel. Eine Batterie (im Falle der US Serie sind 2 Batterien enthalten) Ein BatterieladegerÃ¤t. Ein Netzteil fÃ¼r das BatterieladegerÃ¤t. InbusschlÃ¼sselgrÃ¶ÃŸen: 1x 1,5mm 1x 4mm 1x 2mm 1x 2,8mm 1x 2,4mm 1x 1,3mm Sollte eines dieser Teile fehlen kÃ¶nnen Sie jederzeit ein Supportticket auf www.de.line6.com/support erstellen.