cacibi Posted October 15, 2015 Share Posted October 15, 2015 Am I doing something wrong or is it not possible to set the Optical Trem speed to a note/tap value? Quote Link to comment Share on other sites More sharing options...
duncann Posted October 15, 2015 Share Posted October 15, 2015 I was also disappointed to see this. The absence of a note for the rate might not be so bad if the rate could be dialed in with a little more granularity. The ubiquitous vibe is also like this, and as a result I much prefer the u-vibe in the HD. Quote Link to comment Share on other sites More sharing options...
theKennyG Posted October 15, 2015 Share Posted October 15, 2015 IdeaScale?? I'd vote for both of these. Quote Link to comment Share on other sites More sharing options...
cacibi Posted October 15, 2015 Author Share Posted October 15, 2015 Added to Ideascale: http://line6.ideascale.com/a/dtd/Optical-Trem-and-Ubiquitous-Vibe-speed/788191-23508 Quote Link to comment Share on other sites More sharing options...
harpel Posted October 15, 2015 Share Posted October 15, 2015 look at page 24 in the manual: Adjusts the rate of the effect, with higher settings providing faster rates. Press the knob to toggle between numeric and note values. Not all Rate parameters can be synced to note values, as they may be non-linear and highly interactive. Adjusts the delay/repeat time, with higher settings providing longer delays. Press the knob to toggle between ms and note values. Choosing a ms value provides a specific time in milliseconds; choos- ing a Note Division value provides a time based on the current tempo. With a note division value, this parameter’s value is retained when changing models. Quote Link to comment Share on other sites More sharing options...
cacibi Posted October 15, 2015 Author Share Posted October 15, 2015 look at page 24 in the manual: Adjusts the rate of the effect, with higher settings providing faster rates. Press the knob to toggle between numeric and note values. Not all Rate parameters can be synced to note values, as they may be non-linear and highly interactive. Adjusts the delay/repeat time, with higher settings providing longer delays. Press the knob to toggle between ms and note values. Choosing a ms value provides a specific time in milliseconds; choos- ing a Note Division value provides a time based on the current tempo. With a note division value, this parameter’s value is retained when changing models. Yes I know, it doesn't work on all effects. Try it on the Optical Trem - it doesn't work. It says right in the section you quoted: "Not all Rate parameters can be synced to note values as they may be non-linear and highly interactive." Quote Link to comment Share on other sites More sharing options...
harpel Posted October 15, 2015 Share Posted October 15, 2015 cacibi you're right, I can confirm that. I only used the bias trem, it works there. I'm using the latest firmware Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.