alejo007 Posted July 5, 2016 Share Posted July 5, 2016 Hi guys Yesterday my amplifi fx100 works fine but today not.The switch buttons not work, always stay in the first bank.In the master volume (red leds) not works all leds. The white leds works fine.I try to make a hardware reset but not not works.Help me please!!! Quote Link to comment Share on other sites More sharing options...
Triryche Posted July 6, 2016 Share Posted July 6, 2016 Try a factory reset, if that doesn't work try to reflash it. Quote Link to comment Share on other sites More sharing options...
alejo007 Posted July 8, 2016 Author Share Posted July 8, 2016 Hi,I tried a hard reset and a flash update but it still not works.Until this point I'm a little desperate and I try to disassemble the unit.Fortunately I found the problem and a temporary solution.Between the control panel and the mother board exists a little bus to connect these cards. This bus has some type of glue but for my case, the glue was melting.I pushed the bus and this solve the problem (in the mother board side).How can solve this definitively?orCan I put new glue?What type of glue? Tnks!!! Quote Link to comment Share on other sites More sharing options...
Triryche Posted July 8, 2016 Share Posted July 8, 2016 I would recommend calling Line6 or opening a ticket. Quote Link to comment Share on other sites More sharing options...
RickDahms Posted July 11, 2016 Share Posted July 11, 2016 Thanks for posting. I'm having this same problem. Please post whatever you find out. Thanks! Quote Link to comment Share on other sites More sharing options...
Tavish-Rox Posted August 28, 2016 Share Posted August 28, 2016 This doesn't look like melting glue.. rather hot glue which goes on as a hot melted plastic and cures to look like this during manufacture.. its very common on this type of connector and i wouldn't think that this is your problem.. Quote Link to comment Share on other sites More sharing options...
alejo007 Posted August 29, 2016 Author Share Posted August 29, 2016 I would recommend calling Line6 or opening a ticket. Hi Triyche, Can you tell us how to open a ticket? Tnks Quote Link to comment Share on other sites More sharing options...
Triryche Posted August 31, 2016 Share Posted August 31, 2016 http://line6.com/support/tickets/ You can also navigate there via the support link at the top of forum pages. Quote Link to comment Share on other sites More sharing options...
superfly1 Posted April 17, 2019 Share Posted April 17, 2019 hey alejo did you ever get that fx100 fixed? mine all of a sudden does not power up. ill try your method and see if any of my bus cables are loose Quote Link to comment Share on other sites More sharing options...
alejo007 Posted April 17, 2019 Author Share Posted April 17, 2019 jmmm I think your problem is other. My problem was the unit always power-on but sometimes the leds were crazy. The unit worked for a time but the problem appears again. The last time, line6 send a hardware update and the unit works well after that but honestly I dont use much it. Quote Link to comment Share on other sites More sharing options...
jgcamargo Posted December 13, 2020 Share Posted December 13, 2020 Thanks a lot man, you solved my problem!!! It's stunning that a unit supposed to be used n abused has all its connections secured by hot glue... and not very secure for that matter... Your idea saved me a ton of money Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.