Equilibrium_606 Posted December 16, 2016 Share Posted December 16, 2016 Hey Guys, This has most likely been covered....but I would like to pick your brains regarding some routing with the Helix. I use the Helix as my main device for my guitar signal & I also play synth via Ableton (Samples. Piano, Looping,etc.) So far I have a lot of success doing this in studio, BUT my band will start to gig next year....So I need to find out if the following routing is possible. 1) All Samples, Synth & Looping via XLR outs to front of house 2)1/4 inch outs from Helix running guitar signal to Active Speakers in our back line 3) Returns 1/4 running IEM signal from USB 3/4 & 5/6 from Abelton (Two different Mixes for Vocals & Guitars ) 4) Sending a Signal from Ableton USB 7/8 split 1) for bass channel to FOH & Click to Drummer) via Returns 5) Running 2 Channels from outboard mixer into 2 Sends for Ableton input In Ableton I am running a monitor mix for everyone. I will be getting the vocals, guitar signal & drum mix from a external mixer. I will have my own channel for the guitars & vocals in Ableton.The idea is to have a Main mix (Samples, Guitars Vocals) in Ableton that goes out to front of house, a separate Bass Track to FOH & then have two different monitor mixes running out via USB to the Return outs via the Helix. My patches are DSP heavy so I can't make separate signal paths on the Helix. Will Ableton/DAW be able to route everything as mentioned above? As always, I appreciate your time & advice!! Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.