slydawg65 0 Posted April 7, 2017 hi guys, i switched on my rig this morning for some practice and after loading up a backing track i noticed that the sound was awful. the rig has not been driven hard and it was working fine a few days ago. i cant understand what happened. i have already opened a ticket and awaiting a response but has this issue happened to any of you guys? the 1st half of the clip is the track running through my L2m which sounds fine but then i switch to the L3m and its awful... heres the link.. Thanks. Quote Share this post Link to post Share on other sites
slydawg65 0 Posted April 7, 2017 Sorry guys, problem sorted..please close/delete. Thanks.. Quote Share this post Link to post Share on other sites
gp4leigh 1 Posted April 7, 2017 Hi, My gear sometimes sound like this, I just wondered what was the problem? and how did you resolve it? It sounds like a phasing problem. If thats what it is/was, how would the system go out of phase over night when it was working fine one day and not the next? Look forward to you response, thanks. Quote Share this post Link to post Share on other sites
slydawg65 0 Posted April 7, 2017 actually, the problem remains. it seems to be an intermittent problem. i think something is wrong with the tweeter. it was working again for a few minutes then the same thing happened again. it will have to be returned for repair. Quote Share this post Link to post Share on other sites
fukuri 57 Posted May 28, 2017 Sometimes the connector comes loose and just needs reseated Have had to do that to the odd L2 over the years It's a molex type connected behind the front panel Quote Share this post Link to post Share on other sites
slydawg65 0 Posted June 10, 2017 The LF driver blew. It has since been repaired by Line6 and all is good.. Quote Share this post Link to post Share on other sites