fukuri
-
Content Count
314 -
Joined
-
Last visited
-
Days Won
2
Recent Profile Visitors
369 profile views
-
Switch to RF1 it is more reliable Google on how to. It's a strange procedure
- 1 reply
-
- 1
-
-
See my post I would stay away The fact that not a single person has jumped in to defend it tells you all you need to know I'm a big fan of the G30 and I've done a side by side comparison with the G70 and it has more range and more reliability than the G70 which is expensive but with a lot of issues I really regret buying mine (and I have a line 6 pa,Helix etc) Most of the time the stuff is excellent. This is a turkey. They should withdraw it. It's not fit for purpose
-
Bought one of each as an upgrade to my tortured G30s I'm really disappointed in the lack of range and drop outs I'm experiencing I ran the G30s for 7 years with virtually no problem 2 gigs in with the G70 and I have a third of the range and dropout galore Updated the firmware Have done the nonsense scan (that I didn't have to do with the G30) and still poor performance Having read up on some of the issues here I'm curious to know Is this it? Working as expected just worse than the unit 1/3rd the price
-
L3m Problem. Sound is very thin, brittle.. Video attached.
fukuri replied to slydawg65's topic in StageScape Mixer / StageSource Speakers
Sometimes the connector comes loose and just needs reseated Have had to do that to the odd L2 over the years It's a molex type connected behind the front panel -
G70 Wireless still getting horrible reviews (drop-outs)
fukuri replied to sonicflight's topic in Relay Digital Wireless
I've been a long term g30 user and never had an issue Upgraded to a g70 and a pair of transmitters Had a drop out mid gig NEVER had that with 7 years of G30 Range was about a third of the G30 in the same venue Very disappointed. It's a downgrade ! -
The Yamaha THR10 switched power supplies after it was originally launched because people were getting earth buzzes Does your PSU have a cassette type cable or a kettle lead If it is the former the PSU needs changed
-
Oh dear
-
It would if that was even remotely what I was saying
-
Hi All - Anyone tried a fryette power station with a Helix?
fukuri replied to HoldsworthAM's topic in Helix
Oh and this (before I changed the Fryettes for the Marshall) https://flic.kr/p/HTQskg -
Hi All - Anyone tried a fryette power station with a Helix?
fukuri replied to HoldsworthAM's topic in Helix
Hey I don't post here so much , but I don't use a Freyette powerstation ... I use two and a couple of orange 1x12s loaded with neo creambacks. Great stereo rig and very versatile When I'm out with the PA I use a Marshall 9100 instead of the freyettes (only because I have one racked in the same box as the mixer Sounds equally as good... I run 1/4 to the Freyettes. Full amp models no cab sims. For FOH I have a split just before the end with a dual cab and an EQ block. Here is a pic of my patch. Sorry I can't embed with the iPad https://flic.kr/p/JXAJ95 -
This isn't a purely helix issue btw every 4CM unit I have used has this to some degree you need to isolate the line between the helix and the return A http://lehle.com/EN/Lehle-P-Split-IIwill give you and isolated signal and break the ground loop
-
Urgent help needed! Why does the top end keep cutting from my L2T cab with Helix?
fukuri replied to Graemey's topic in Helix
Yes Loose connection to the tweeter -
Thanks
-
Hi folks I've done a lot of searches but come up blank I think I have a blown speaker in my L3s It makes a horrible overloaded farty noise with the kick drum Levels and gain are fine I can't find any info on replacement drivers for these Does anyone know if there is a drop in replacement It's heavy and inconvenient to ship to a service centre for a fairly simple repair
-
Three options (well four but I'll come on to that) Option 1 use your amp heads FX return (bypasses the preamp) and eq to taste Option 2 get a dedicated power amp like a matrix or a Fryette (or my personal favourite a Marshall 9100) Option 3 get a line 6 stage source or some other FRFR (full range speaker) Option 4 ignore the amp modelling use your amp and have a kick lollipop effects box